Best wood carving with angle grinder
Deal Score0
Deal Score0
Best results for wood carving with angle grinder
Grinder Wood Carving Chain Disc Angle Grinder Disc IRmm Chain Saw Plate 22 tooth, 5/8" center hole For Shaping Cutting & Engraving of Wood, Plastic, Ice & Hard Rubber (4 inch)
$13.99
$19.17
Last update was on: November 14, 2024 10:11 pm
- Arbor:5/8inch (16mm) ,14000rpm Max
- Fits most 4- and 4-1/2-inch angle grinders.
- Grinder Disc Chainsaw Cuts in any direction while making smooth cuts,takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber.
- Regardless of grain or knots the blade cuts through the material with ease,especially useful for cutting floor and wall openings.
- 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.Chains can be either be sharpened using a chain saw file or replaced as needed.
Original GRAFF Speedcutter Woodworking Blade for Angle Grinder, Disc for Wood Carving, Cutting, Shaping with 3 Teeth 7/8” Arbor (4.5 Inch (115mm)) from Manufacturer
$17.00
$23.97
Last update was on: November 14, 2024 10:11 pm
- Angle grinder woodworking blade is an ideal solution for cutting, carving wood, aerated concrete, plasterboard, laminate and plastic by using your power tool at high rotation rates. Angle grinder disc for wood has a special anti kickback design
- Three tungsten carbide tooth design ensures safe work with the blade because it creates reasonable radial resistance value at high rotation speed rates. Please note that using standard circular saw blades with an angle grinder is NOT safe
Wood Carving Disc,IRmm 4 Inch Angle Grinder Chain Disc Double Saw Teeth Anti-Kickback Woodcarving Saw Blade,22 Teeth, 5/8" Arbor (4 in)
$13.99
$19.59
Last update was on: November 14, 2024 10:11 pm
- 4" Diameter
- Maximum running RPM is 14,000 RPM
- Fits most of the 4 or 4-1/2 Inch angle grinders.Cuts in any direction
- Cuts everything from hardwood,plastics and other soft materials.Great for curved work,cutting sculpting, gauging and channeling
- Warning: To prevent serious injury,amputations,and DEATH,read and follow all power tool instructions and all instructions included with this item
- We Stand by and Believe in Our Products.If you are not 100% satisfied,please contact the SELLER.We will make it a great shopping experience
Grinder Disc Chain Plate,KOBWA 4/4.5 Inch Grinding Wheel Disc and 22 Tooth Fine Cut Carving Chainsaw Blade Set For 100/115 mm Angle Grinder,5/8 Inch Grinder Center Hole,Woodwork Circular Saw Blades
$12.98
$16.35
Last update was on: November 14, 2024 10:11 pm
- ????[[Material] Steel, 4/4.5 Inch Diameter Chain 22 Tooth Fine Cut Carving, Circular Saw Blades provides a smooth "
- finished"
- surface which is great for minimal sanding afterwards.Steel /Chains can be either be sharpened using a chain saw file or replaced as need be.
- ????[Function] Grinder disc for wood carving,Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed when works,maximum speed up to 25000rpm /Great for curved work, like the inside of bowls, for fast waste removal.
Angle Grinder Disc 22 Tooth Chain Saw Carving Blade Plate 4" for Wood Cutting Chainsaw Wheels Cutter 100/115mm Circular Woodworking Engraving Tool
$9.88
$14.62
Last update was on: November 14, 2024 10:11 pm
- ▲ Made of premium steel materials, more durable to use.All blades are twice as large as conventional blades.
- ▲ Great for curved work, like the inside of bowls, cutting discs, resin metal cutting wheels for plywood, melamine, wood, stone, metal, plastic cutting and fast waste removal.
- ▲ Fits For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.
- ▲ Provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
Yakamoz 4-1/2" Angle Grinder Disc 13 Teeth Chain Plate Wood Carving Disc Cutting Blade for 7/8" Arbor Angle Grinder Woodworking Cutter Tool
$10.99
$16.27
Last update was on: November 14, 2024 10:11 pm
- Arbor size: 7/8" (22mm), Diameter: 4-1/2" (115mm), Maximum speed: 14000RPM, Wheel thickness:0.2" (5mm)
- 13 Tooth cutting chain design provides a smooth “finished” surface which is great for minimal sanding afterwards.
- The chain saw blade is held in place between two steel plates which provides a secure grip for carving.
- Made of hard carbide, which has a good feature in wear resistant and durable.
4 Inch Grinder Disc and Chain 22 Tooth Fine Cut Chain Set For 100 115 Angle Grinder 5/8 Inch Center Hole
$12.50
$15.25
Last update was on: November 14, 2024 10:11 pm
- Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed and maneuverability.
- The chain saw blade is held in place between two steel plates which provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
- Our 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.
TOVIA 3 Teeth Wood Cutting Shaping Disc for Angle Grinder,Multipurpose Carving Wheel,Stump Log Grinder Attachment with 7/8" Arbor
$16.60
$20.75
Last update was on: November 14, 2024 10:11 pm
- Three tungsten carbide teeth ensure safe work with the blade by creating the acceptable value of radial resistance at high rotation rate
- Special anti-kickback design. Designed especially for working at high RPM rates (up to 12 200 RPM).
- No overheating of the blade even during continuous work
- Smooth grooving with a clean cut is ensured by the unique shape of the teeth
- Multi-purpose cutting for wood board,MDF,chipboard,laminate flooring,plasterboard,plywood.Remove material quickly and fast.Wood carvers CHOICE.
Kutzall Extreme Shaping Disc – Coarse, Tungsten Carbide Coating: 4-1/2" (114.3mm) Diameter x 7/8" (22.2mm) Bore – SD412X90
$60.00
$70.20
Last update was on: November 14, 2024 10:11 pm
- Coarse coating provides rapid material removal, saving you time and effort.
- Tungsten Carbide teeth give you outstanding wear-life.
- Comfortable, Effortless Operation - Allowing you to easily and quickly remove a variety of materials.
- Very resistant to loading.
- Should only be used on non-metallic materials. Made in USA
King Arthur Tools Lancelot Woodcarving Disc, 22 Teeth, 7/8" Arbor
Kutzall Extreme Shaping Dish – Very Coarse, Tungsten Carbide Coating: 4-1/2" (114.3mm) Diameter x 7/8" (22.2mm) Bore – DW412X120
$60.00
$79.80
Last update was on: November 14, 2024 10:11 pm
- Very Coarse coating provides rapid material removal, saving you time and effort.
- Tungsten Carbide teeth give you outstanding wear-life.
- Comfortable, Effortless Operation - Allowing you to easily and quickly remove a variety of materials.
- Very resistant to loading.
- Should only be used on non-metallic materials. Made in USA
Grinder Disc Chain Plate,Woodwork Circular Saw Blades, 4/4.5 Inch Grinding Wheel Disc and 22 Tooth Fine Cut Carving Chainsaw Blade Set For 100/115 mm Angle Grinder
$19.99
$27.99
Last update was on: November 14, 2024 10:11 pm
- Grinder Disc Chain Plate,Woodwork Circular Saw Blades, 4/4.5 Inch Grinding Wheel Disc and 22 Tooth Fine Cut Carving Chainsaw Blade Set For 100/115 mm Angle Grinder
- Material: Steel 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.4" Diameter
- Maximum running RPM is 14,000 RPM
- Function:Cuts everything from hardwood,plastics and other soft materials.Grinder disc for wood carving,Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics,
KwikTool USA BBC450 Bad Blade Carver 4-1/2" 6 Tooth With 1" Arbor And 7/8", 5/8", And 20mm Reduction Rings
$17.43
$21.44
Last update was on: November 14, 2024 10:11 pm
- "Bad Blade Carver¿" 4.5" 6 tooth with 1" arbor with 5/8" reducer
- New Patented blade concept comes from Europe where they have been using these blades in angle grinders for years for working with wood .
- Ingenious, with specially designed tooth layout, set and reinforcement which give our tungsten carbide blades their awesome cutting ability with NO Kick-Back
- Rips and cuts and carves all types of woods, laminates, plastics, fiberglass and composites all with NO Kick-back