100workfromhome 
Best results for drill bit for hardie board
Spyder 600044Rapid Core Eject Hole Saw, 4.25-Inch
Hole Pro X-305 1-7/8″ to 12″ TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
$159.95
$231.93
Amazon.com
Last update was on: December 24, 2024 5:50 am
- Twin blades for faster/smoother cutting, strong shield traps dust &
- controls cutting depth
- User replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
- Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
- 14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
- Complete kit - add your 1/2" drill chuck - Needs ¼ power of hole saws so bigger holes easily cut
Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” dia for 4 inch lights: fast cutting in drywall, lath & plaster, Hardi board: easy plug removal uses standard 5/8 18 thread hole saw arbor adptr
$27.95
$31.02
Amazon.com
Last update was on: December 24, 2024 5:50 am
- 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials
- Continuous cutting edge for smooth cutting even in wood lath and plaster
- Cuts through drywall, plaster, CornHole board, fiber cement Hardie board, stucco, acoustical tile, ceiling tile
- Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model
- Open back design for faster cut plug removal
Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” dia for 6 inch lights: fast cutting in drywall, lath & plaster, Hardi board: easy plug removal uses standard 5/8 18 thread hole saw arbor adptr
$36.95
$48.40
Amazon.com
Last update was on: December 24, 2024 5:50 am
- 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials
- Continuous cutting edge for smooth cutting even in wood lath and plaster
- Cuts through drywall, plaster, CornHole board, fiber cement Hardie board, stucco, acoustical tile, ceiling tile
- Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit
- Open back design for faster cut plug removal
Rock-On 23301#9 by 1-1/4" Serrated Head Star Drive Cement Board Screws (185 Pack)
Heavy Duty 4" Hole Saw, 38mm Depth Bi-Metal HSS 4 Inch Hole Saw Blade With Positive Rake Teeth For Cutting Metal, Drywall, Plastic, Wood, Fiberboard
$13.99
$17.63
Amazon.com
Last update was on: December 24, 2024 5:50 am
- 4 inch Hole Saw (WITHOUT ARBOR) made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. Drilling with sharper Positive Rake Tooth cuts material faster than other brand.
- The 4" hole saw fits universal Mandrel such as Lenox, Dewalt, Milwaukee and Bosch. 38mm depth of hole saw help to cut 2x material in 1 pass.
- This 4 Hole Saw Blade is design for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling.
Malco TSF2 TurboShear Fiber Cement Backer Board Shear
$138.32
$201.95
Amazon.com
Last update was on: December 24, 2024 5:50 am
- Attaches to a drill or impact driver you already own
- Easily cuts 1/2-inch backer board and 5/16-inch Fiber Cement Siding Plank with minimal dust
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut precise arcs, straight lines and fine trimming
- Made in the USA
Hole Pro X-230+ 1-7/8" to 9-1/4" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
$143.95
$158.35
Amazon.com
Last update was on: December 24, 2024 5:50 am
- TWIN BLADES for balance – NO BALANCE BARS to BREAK and finer kerf than with SINGLE Blade models
- CUT HOLE 1-7/8" to 9-1/4" in ceilings, walls, floors - Cut Depth control
- UNIQUE 5/8” threaded shaft tip to QUICKLY MOUNT CARBIDE GRIT holes saws
- Sturdy Carry Case and replaceable blades: Cut plywood, sheetrock, plaster, veneers, cement board, ceiling tiles, T&G
- LIFE TIME warranty see details under IMPORTANT Information section
AUTOTOOLHOME 2 inch Metal Steel Hole Saw Tooth Carbide Tip TCT Drill Bits Kit for Thick Metal Wood
$11.80
$17.58
Amazon.com
Last update was on: December 24, 2024 5:50 am
- 100% High quality and Brand new.
- The gears is made from YG8 tungsten carbide steel and the rigidity varies from 64HRC to 65HRC.
- Sharp gears and anti-cutting with lower consumption make the product a long service life.
- The hole saw has a twist drill bit inside, which is undetachable.
- Carbide teeth for fast cutting of clean, round holes.
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
$94.49
$113.39
Amazon.com
Last update was on: December 24, 2024 5:50 am
- Made in the USA
- Replaceable blades
- Turns your power drill into a heavy duty power shear
- Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
- Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
- Navigates tight patterns and square cuts
Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast in Wood,Plastic, Drywall, Thin Metal(Black)
$19.99
$28.39
Amazon.com
Last update was on: December 24, 2024 5:50 am
- HIGH PERFORMANCE METIERAL: The Eliseo hole saw made of M42 High Speed Steel and BI-Metal, with higher hardness(≥64HRC), higher toughness and stronger wear resistance.
- EFFICIENT SMOOTH CUTTING---High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensure Eliseo hole saw blade cuts smooth,clean and fast.
- WIDE APPLICATION---The Hole saw cuts 4.5 inch diameter holes through wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal.The ELiseo Hole Saw comes in handy for your DIY projects when working on taillights, cooling fans, radiator ,stereo equipment and more.
CARBIDE TIPPED HOLESAW 3-5/8"
Blue Boar(R) Master Combo Kit-11 Sizes MEGA Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x more holes using cordless drills. For plywood, MDF, Particle board, Hardie board
$149.95
$209.93
Amazon.com
Last update was on: December 24, 2024 5:50 am
- 11 Carbide Hole Saws: 3/4", 7/8", 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/2"
- Tungsten carbide teeth hole saws
- One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench
- NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods)
- 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING
- ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****
Malco TSF1 Turboshear Fiber Cement Siding Shear
$138.99
$176.52
Amazon.com
Last update was on: December 24, 2024 5:50 am
- Attaches to a drill or impact driver you already own
- Easily cuts 5/16-inch Fiber Cement Siding Plank with minimal dust
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut precise arcs, straight lines and fine trimming
- Made in the USA
