100workfromhome 
Best results for drill and tap combination tool
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$15.58
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Nxtop 6Pcs Metric Thread M3-M10 Screw Tapping Tool 1/4" Hex Shank Titanium Plated HSS Combination Drill and Tap Set
$14.39
$18.71
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- 1/4 Inch Hex Shank HSS Drill Bit & Screw Tap Set
- High speed steel with Titanium coating,which supports much longer service life
- Metric M3,M4,M5,M6,M8,M10 thread countersink screws can be tapped with this drill and tap set
- M3 x 0.5mm pitch,M4 x 0.7mm pitch,M5 x 0.8mm pitch,M6 x 1.0mm pitch,M8 x 1.25mm pitch,M10 x 1.5mm pitch
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated
6 Pcs 1/4" HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch Tool – Gold
$15.99
$18.71
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Material: HSS (4341) High hardness, rustproof, solid and durable
- Self-centering design: do not need additional center drilling or center punching
- Fast replacement composite cone, uses drill edged principle. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex shank
Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set
$34.99
$52.14
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Greenlee DTAP8-32 Combination Drill and Tap Bit, 8-32NC
$8.61
$11.54
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/Countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Champion DT22HEX-SET10 Combination Drill and Tap Set, 10-Piece
$135.28
$196.16
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Tapered neck design significantly reduces drill & tap breakage
- The 135 degree split point drill permits holes to be cut at high speeds. Taping caution must be adhered to with slower speed.
- Superior strength durability provided by high Molybdenum content and high speed steel with functional black and gold surface treatment that holds lubricant for smoother drilling.
- Applications include: Construction, Electrical, Maintenance, Industrial, Automotive, Farm Implement Machinery, HVAC. Cuts steel, cast iron, aluminum, bronze, brass, zinc and some stainless steel.
GearWrench 114PC 82812 Ratcheting Tap and Die Drive Tool Set SAE/Metric
6Pcs/Set Hex Shank Drill Bits HSS 4341 Combination Drill and Tap Bit Screw Tap Deburr Countersink Bit (6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC)
$13.99
$17.49
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- 6Pcs Hex Shank Drill Bits Set Inculued Size: 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm)
- Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.
- Suitable for Low Hardness Materials Such as Wood, Aluminium Plate, Plank, Plastic, or Sheet Iron (thickness of less than 3mm).
- One-step Processing, Drilling, Tapping, Deburring and Countersinking in One Operation, Working Efficiently and Saving Time and Labor.
Greenlee DTAP1/4-20 Combination Drill and Tap Bit, 1/4-20NC
$7.92
$8.71
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
$11.49
$16.78
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
- Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation.
- Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling.
- One piece construction guarantees proper drill for tap size.
- 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap.
Accusize Industrial Tools 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040
$58.00
$69.02
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- 18 Pcs/Set H.S.S. Tap & Drill Set, UNC
- Size of Taps: 6-32UNC, 8-32UNC, 10-24UNC, 10-32UNF, 1/4"-20UNC, 5/16"-18UNC, 3/8"-16UNC, 7/16"-14UNC, 1/2"-13UNC.
- Size of Drills: #36, #29, #25, #21, #7, F, 5/16", U, 27/64".
- HSS Fully Ground
ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric
$106.83
$141.02
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards
- Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material
- Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading
Breynet Deburring External Chamfer Tool, 6pcs Combination Drill and Tap Bit Set 6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC, 5” Automatic Spring-Loaded Center Hole Punch Tool Set
$15.99
$21.59
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- ▲ Metric Deburr Countersink Drill Bit Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor & time
- ▲ Drilling and tapping 2 in 1.Suitable for wood, plank, plastic, aluminium plate or sheet iron (thickness of less than 3mm).
- ▲ Auto Centering Hole Punch for Determine Drilling Position can mark a dimpled starting point in materials such as sheet metal, wood, plastic surface and prevent nails or screws from wandering around
Tap and Die Set Metric Hardened Steel Combination Garage Tool Kit with Box -32pcs
$25.99
$30.67
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- ◆ QUALITY: the tap die set made from quality hardened steel, it's durable to use
- ◆ CLASSIFIED: you will get 32pcs tools, all of them organinate in a case, it's easy for you to use it.
- ◆ UNIQUE: tap and die set metric ideal for rethreading fasteners and fastener holes for auto and machinery repair, it will play an impartant role in your work.
- ◆ CLEARLLY: all of them are clearly marked with size for you fast finding, is perfect for use on vehicles and machinery to create threads.
Muzerdo 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case
$129.99
$142.99
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- This tap and die set are made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel.
- 86 piece tungsten steel set comes in an organized, rugged plastic storage case
- Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman
CSLU-Tool 6 Pcs High Speed Steel HSS 6542 1/4 Inch Hex Shank Titanium Screw Thread Tap Drill Bit M3/4/5/6/8/10 [All Sizes]
$23.99
$28.55
Amazon.com
Last update was on: November 7, 2024 9:46 pm
- Made from hardened high-speed steel vs carbon steel for longer life.
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
- Fast replacement composite cone, uses drill edged principle.
- Self-centering point, do not need assistant center drilling or center punching.
- High hardness, rustproof, solid and durable.
