100workfromhome 
Best results for diamond drill for glass
Diamond Drill Bits, Baban 10Pcs Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble, 6-32mm
$8.69
$9.82
Amazon.com
Last update was on: May 2, 2024 8:02 am
- ✔ Satisfied Size - 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86", 26mm/1.02", 32mm/1.26"
- ✔ Ideal Application - This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.They are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate Mable, granite light stone
Diamond Drill Bit Set, DRILLPRO 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm – 30mm
$8.39
$9.90
Amazon.com
Last update was on: May 2, 2024 8:02 am
- SMALL RESISTANCE: Small incision resistance, opening speed is quickly, easy removal of chips and other advantages.Also help to open accurately. Large chip holes to ensure that when the punching smooth, punching accurate.
- DURABLE: Nickel-plated with a diamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole.
Drilax ® 10 Pcs Diamond Drill Bit Set 5/32", 3/16", 1/4", 5/16", 3/8", 1/2" , 5/8" , 3/4" , 7/8" , 1" In Inch Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles Lot Coated Bits DIY Kitchen, Bathroom, Shower, Lamps 100425
$19.95
$22.34
Amazon.com
Last update was on: May 2, 2024 8:02 am
- GREAT SET with 10 Mostly Used Sizes: from 5/32" in to 1 inch
- HUGE COST SAVINGS compared to big box stores. Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills. Use a guide
- Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles
- FOR ALL DRILLS - HAND - PORTABLE - UPRIGHT - Shank sizes vary, maximum shank is 3/8
Sunjoyco Diamond Drill Bits, 30 PCS Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY (6mm-50mm)
$19.99
$22.59
Amazon.com
Last update was on: May 2, 2024 8:02 am
- ★【General Usage】: Our set of 30 Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly
- ★【Supreme Quality】: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes
1/2" Inch Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool (5 Pack)
$7.99
$11.91
Amazon.com
Last update was on: May 2, 2024 8:02 am
- Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws
- Side holes allow for easy slug removal after drilling
- Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics
- Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion
- 5pcs 12mm 1/2" Inch
uxcell 1/8-inch 3mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain 10PCS
$6.69
$9.17
Amazon.com
Last update was on: May 2, 2024 8:02 am
- SIZE - 3mm(1/8-inch) Drilling Diameter, 2.5mm(0.1-inch) Shank Diameter.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.
- SPECIAL DESIGN - Side open can remove the waste to keep the drill bit clean.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. (Need to be used at a low speed
BLENDX Diamond Hole Saws Kit -Tile and Glass Hole Saws Cutting Drill Bits for Bottle, Ceramics, Porcelain 1/4" – 2" (6-50mm) – 10 Pack
$17.99
$23.03
Amazon.com
Last update was on: May 2, 2024 8:02 am
- Diamond hole saw / core drill style bit.
- 10 Sizes: 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm
- Application: Drill Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone
- SPEED KILLS: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
- Warrnings: Not for use on Concrete or for depths beyond about 1/2"
Diamond Glass Drill Bit for dremel, Ceramic Tile Drill Bit, Porcelain Tile Drill Bit, Diamond Hole Saw Set Drill Bits for Dremel Rotary Tool for Glass, Ceramic, Stone, Bottle, Electric Drill
$21.99
$29.25
Amazon.com
Last update was on: May 2, 2024 8:02 am
- For glass, glass bottle, cutting hole diameter from around 1/4" to 5/8" (6.0mm-16mm) or bigger and used to drill hole cut hole in glass, glass bottle, glass hole saw, glass drill bit for dremel tool or common rotary tool
- For ceramic tile, porcelain tile, cut hole diameter from around 1/4" to 1/2” (6.0-12mm) or bigger and used to drill hole cut hole in ceramic, porcelain, flower pot, terra cotta, glazed ceramic tile, polished porcelain tile, marble, granite and shower tile, bathroom tile, drill hole for stone, jade, jewelry, Beach Glass, Sea Shells, Gemstones, drill bit for dremel rotary tool or other brand rotary tool, handheld Electric Drill
Diamond Hole Saw – 15 pcs Diamond Drill Bit Set Extractor Remover Tools for Glass, Ceramics, Porcelain, Cermic Tile (1/4"-2")
$13.86
$19.82
Amazon.com
Last update was on: May 2, 2024 8:02 am
- 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
- 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life.
Diamond Drill Bit Glass drill bit for Tile Marble Granite Fiberglass Ceramic Tool Drill Bit Set 5 Pack | 5/32” – ½”
$7.88
$11.27
Amazon.com
Last update was on: May 2, 2024 8:02 am
- Glass drill bit Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics
- Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion
- Diamond Drill Bit coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws
- Diamond grit hole saw drill bit side holes allow for easy slug removal after drilling
Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool Drill Bit Set 5 Pack | 5/32” – ½”
$7.99
$9.83
Amazon.com
Last update was on: May 2, 2024 8:02 am
- Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws
- Side holes allow for easy slug removal after drilling
- Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics
- Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion
- Sizes include: 3/25”, ¼”, 5/16”, 3/8”, and ½” with a cutting depth of ¾”and ¼” shank
Drilax™ 5 Pcs Diamond Drill Bit Set 3/16", 1/4", 5/16", 3/8", 1/2" – Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz – Lot 5 Diamond Coated Drills – Kitchen, Bathroom, Shower, Lamps Drilax050513
$9.99
$14.19
Amazon.com
Last update was on: May 2, 2024 8:02 am
- 5 Mostly Used Sizes: 3/16, 1/4, 5/16, 3/8, 1/2 -High Quality Diamond Drilling Tool Set of
- Over 80% cost savings compared to big box stores. Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Do NOT run dry. These Diamond Coated Tools will work best if you use water to keep the tools cool.
- Shank sizes vary, maximum shank is 1/4 - suitable for all common electric drillers.
15pcs Diamond Coated Drill Bit Set Tile Marble Glass Ceramic Hole Saw Drilling Bits For Power Tools 6mm-50mm
$13.79
$18.06
Amazon.com
Last update was on: May 2, 2024 8:02 am
- 15 different drill bits included: 6mm(1/4"), 8mm(5/16"), 10mm(3/8"), 12mm(1/2"), 14mm(9/16"), 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 26mm(1-1/32"), 28mm(1-3/32"), 30mm(1-1/8"), 40mm(1-1/2"), 50mm(2"). Meet most of your different needs.Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable (especially for glass AND tile)
- EXTREME HARD:These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
Tacklife AHS02C Diamond Drill Bits Hole Saw Drill Bits Hollow Extractor Remover Set Tools with 10 Packs, Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble | 6-50mm
$14.97
$21.11
Amazon.com
Last update was on: May 2, 2024 8:02 am
- You could watch our video and konw more about Tacklife glass hole saw AHS02C
- ▲DIAMOND COATING & NIKELP LATING SURFACE - Diamond coating enhances the drilling speed, which makes the bit more sharp
- and the nickel plating surface can extend the service life and enhance the surface corrosion resistance
- ▲CARBON STEEL -the drill bits are made of carbon steel, and solidified by enhanced electroplating, together with perfect combination of diamond coating and carbon steel, making it conducive to grip drills (These drill bits do not have center pilot drills)
Tile Hole Saw, 15 PCS Diamond Drill Bits 6-50mm Glass Tile Hollow Core Extractor Remover Tools for Glass, Ceramics, Porcelain, Ceramic tile
$10.99
$16.05
Amazon.com
Last update was on: May 2, 2024 8:02 am
- 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp
- 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength
- 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands
Drilax™ 5 Pcs Diamond Drill Bit Set 3/4", 1", 1-1/4", 1-1/2", 1-3/4" – Wet Cutting Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Bottles, Lot 5 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucet Drilax052045
$29.99
$37.19
Amazon.com
Last update was on: May 2, 2024 8:02 am
- PREMIUM QUALITY, LONG LASTING, TALL (DEEPER CUTS) Diamond Hole Saw Drill Bit Tool Set in Elegant PU Zipper Storage Case. High Density Poly Insert Included. You can use it as a guide to keep the hole saw in position.
- BUY AS A SET and SAVE OVER 80 Percent on MOST POPULAR 5 Sizes: 3/4″, 1″, 1-1/4″, 1-1/2″, 1-3/4″ – Having these sizes available will help you cover almost all of your applications.
