The Best Dewalt Metal Shear

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

The DEWALT DCS491B 20V max* 18 gauge swivel head Shears features a 360 degree tool free swivel head which allows user to access tight quarters while maintaining comfort. Cuts 7/32″ strips which continuously curls out of the cutting area providing consistent and accurate cuts. Cordless Shears allows user to take the tool to the work place. Specifications: capacity (stainless steel) – 20 gauge, capacity (mild steel) – 18 gauge, strokes/min – 0-2,300 SPD, min cutting Radius – 5.5 inches. Includes: (1) 20V max* swivel head Shear bare tool. *(Tool only / battery sold separately)

The DEWALT DCS494B 20V MAX* 14ga Swivel Head Double Cut Shears, Bare tool is a 360 degree tool with a free swivel head which allows user to access tight quarters while maintaining comfort. These shears can cut a 7/32″ strip which continuously curls out of the cutting area providing consistent and accurate cuts. They also features an LED work light which illuminates surface areas. Cordless shears allows user to take the tool to the workplace. Capacity (stainless steel): 16ga, Capacity (mild steel): 14ga, Speed: 2,450 spm, Min cutting radius: 5 Inches. This is a bare tool times, battery sold separately. Includes: (1) DCS494 shears, (1) Hex wrench.

Product Description

Variable speed dial, all ball-bearing motor for long life, head swivels 360 degrees, cuts 7/32" strip which continuously curls out of cutting area for clear line of sight, cuts radius of 5-1/2" and larger. Specs: Max watts out 470W, strokes/Min 0-2, 500 SPM, capacity in: (mild steel) 18 gauge (stainless steel) 20 gauge, replacement parts: left/right blade, center blade, 9.1&Quot; long, weighs 5.0 lbs.

Amazon.com

Cutting through metal is a simple process if you have the right tool. Quickly slice your way through sheets of metal with the innovative DEWALT DW890 18 gauge electric shear with pivoting head. Powerful and easy to operate, the DW890 features a hearty 5 amp, all ball-bearing motor for enduring nonstop use and multiple speeds so you can adjust your tool for various metal widths. For increased precision, this shear also features a 360 degree pivoting head and operates without losing sight of the cutting line. For best results, use the DW890 with a maximum 18 gauge for low carbon steel and 20 gauge for stainless steel.

See all Product description

The DEWALT dcs496m2 20V max* 18 gauge offset Shear features a tool-free 360 degree swivel head which allows user to access tight quarters while maintaining comfort. The offset Shear design can easily turn and cut circles. Also, this offset Shear design can easily cut through 20Ga spiral duct seams. Specifications: capacity in steel – 18 gauge, strokes/minute – 0-2,300 SPD, minimum cutting Radius – 1.0 inches. Includes: (1) Dcs496 Shear. *(Tool only – battery sold separately).

Product Description

Turbos hear. Heavy-duty, attachment inserts into chuck of 3/8″ Or 1/2″ Drills. Cuts straight and to the left, up to 20-Gauge galvanized steel. Ideal for cutting in ferrous and nonferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, and ductwork. Offset design keeps both hands away from work surface. Heavy-duty, attachment inserts into chuck of 3/8″ Or 1/2″ Drills. This product is manufactured in United states. This product meets customer requirement.

Amazon.com

The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply insert the TurboShear directly into any 3/8-inch chuck of a standard 1,200 RPM A/C or cordless drill. This rugged but inexpressive accessory cuts straight and to the left. It makes fast cuts in sheet metal and is capable of navigating tight curved patterns and squares in heavy 20-gauge galvanized steel. Blind cuts require only a 1/2-inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. The long-wearing hardened jaws are also replaceable.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 – 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

Product description

Dependable, 3.0 Amp, all ball-bearing motor for long life

From the Manufacturer

The DW896 operates on an oscillating punch and stationary die principle to quickly and efficiently cut sheet-type materials without distortion. The round punch allows a 360-degree pivot while cutting for increased versatility. A rotating head also allows users to change cutting directions as desired. The DW896 is ideal for cutting 16-gauge mild steel and 18-gauge stainless steel.

Features

• Dependable 3 amp, all-ball-bearing motor for long life
• Round punch allows 360-degree pivot while cutting
• Rotating head allows user to change cutting directions as desired
• Easy-to-change punch and die, which saves time and money
• No distortion to material being cut
• Gear case constructed of strong aluminum alloy for maximum durability
• Paddle switch for convenient 1-handed operation

Specifications

• Amps: 3 AC/DC amps
• Max. watts out: 385 watts
• Strokes per minute: 2,100 spm
• Capacity (mild steel): 16 gauge
• Capacity (stainless steel): 18 gauge
• Starting hole: 1 inch
• Tool length: 9.75 inches
• Tool weight: 4.5 lbs.

Warranty
This DeWalt high-performance industrial tool comes with a warranty package that includes:
30-day, no-risk satisfaction guarantee
One-year free service contract
One-year warranty

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt Metal Shear, eg:

• What are Top 10 Dewalt Metal Shear for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt Metal Shear to buy?
• What are Top Rated Dewalt Metal Shear to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt Metal Shear?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt Metal Shear.
• Before deciding to buy any Dewalt Metal Shear, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt Metal Shear and What you should consider when buying the Dewalt Metal Shear and Where to Buy or Purchase the Dewalt Metal Shear. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt Metal Shear of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt Metal Shear.