The Best Dewalt 4 Inch Grinder 18 V

Product Description

The product is 18V CRDLS Cut Off Tool

Amazon.com

The tough, no-nonsense DEWALT DC411B 18-volt, 4-1/2-inch cordless cut-off tool is designed to meet the challenges of everything from rusted rebar and steel I-beams to resilient threaded rod and corroded angle iron. Its 6,500-RPM motor and 4-1/2-inch-diameter cutting wheel are perfectly engineered to cut and grind metal. It’s powered by DEWALT’s 18-volt cordless batteries (not included).

The versatile DEWALT DC411B cut-off tool
(view larger).

Power and Performance

Powered by a 6,500 RPM motor, the DC411B’s abrasive 4-1/2-inch-diameter wheel will slice through most metals quickly and cleanly. Besides the cutting and grinding wheel, the versatile DC411B will also accept a Zirconia-grit flap disk, stringer wire wheel, and rubber-backed sanding disc, allowing you to clean, smooth, shape and finish a wide variety of materials, including steel, wood and masonry.

Comfort and Convenience

The DC411B has a low-profile, jam-pot housing that ensures precise gear alignment for a smoother, quieter transmission while allowing access to tight, narrow spaces. A quick-change wheel release provides easier and quicker wheel removal without the need for a wrench, and since there’s no cord to drag around, you can work un-tethered anywhere at any height or angle. Other commercial-grade features include a two-position side handle and a large trigger switch with lock-off button.

Bare Tool

This DEWALT cordless tool does not come with a battery or charger. It’s compatible with the DC9096 18-volt XRP battery pack and DW9117 15-minute charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It’s also covered by DEWALT’s one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use–for free.

What’s in the Box

One DEWALT DC411B 18-volt 4-1/2-inch cordless cut-off tool, one Type 1 cutting wheel and safety guard, one wrench, two matched flanges, and one two-position side handle (batteries and charger sold separately).

See all Product description

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

DEWALT DCG413B 20V XR Brushless 4.5-Inch angle Grinder features a DEWALT Brushless motor which delivers up to 57% more run time over brushed. This single speed motor offers a No load speed of 9, 000 max RPM’s. It has a Paddle swith to operate; the brake is engaged as soon as the Paddle switch is released, bringing the wheel quickly to a stop. This tool also offers a 2-Position side handle for user comfort and convenience. Specifications: wheel diameter 4.5 inches, Arbor size 0.625 inches, metal motor bearings, Paddle switch, single speed. *This is a baretool item, battery sold separately. Includes: 1) angle Grinder.

The DEWALT DCG412B 20V MAX Lithium Ion 4-1/2″ Cut-Off Tool features a 7,000 RPM motor that provides high power for cutting and grinding applications. A Quick-Change wheel release allows for tool free wheel changes without the need for a wrench, and the tool free guard allows for quick, easy guard adjustments/positioning. It offers a 2-finger trigger switch with lock-off button for convenient activation and easier gripping, along with a 2-position side handle offers greater control, comfort & versatility. Common applications include: Cutting metal, threaded rod, rebar with Type 1 cut off wheels, Finishing metal with wire stringer bead wheels, sanding flap discs, and Grinding metal with 1/8 and 1/4 hubbed or depressed center wheels. Includes: DCG412 Cut-Off Tool, Spanner Wrench, Type 1 (Cutting) Guard, 2-Position Side Handle. This is a bare tool item (battery sold separately).

The DEWALT DWE402 4-1/2″ 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It’s Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: (1) 2-position side handle, (1) 4-1/2″ One-Touch (T27) Guard.

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The DEWALT DWE4214 4-1/2″ 11amp Angle Grinder Slide features an 11 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protection. It has a dust ejection system which provides durability by ejecting dust and debris particles that enter the tool through the air intake vents. A low profile gear case allows access into tight spaces, and a quick-change wheel release allows tool free wheel removal. This grinder has a One-Touch guard that allows 360 degree rotation of the guard with a single action, along with a Lock-On slide switch provides increased user comfort in extended use applications. Matching wheel flanges allow the use of most common accessories.

The DEWALT DWE402W 4-1/2″ Small Angle Grinder with Wheel features an 11 Amp AC/DC 11,000 RPM motor which is designed for faster material removal and higher overload protection. The Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. It has a low profile gear case allows access into tight spaces, along with a Quick-Change wheel release that allows tool free wheel removal without the need for a wrench. A One-Touch Guard allows for 360 degree rotation of the guard with a single action, and a paddle switch with safety lock-off prevents accidental start up. The matching wheel flanges allow the use of common accessories. Includes: (1) Grinder, One-Touch Guard, 2-Position Side Handle, Wrench, 4-1/2″ Abrasive Wheel.

The DEWALT DWE43116 4-1/2″- 5″ high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5″ type 27 guard, 1) 5″ type 27 guard, 1) 6″ type 27 guard.

The DEWALT DWE4120 4 1/2″ Paddle Switch Small Angle Grinder has a 9-Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The high efficiency motor provides low operating temps. A featured One-Touch Guard allows for 360 degree rotation of the guard with a single action. The slim, ergonomic body design provides increased comfort in extended use applications and the low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces. This unit also features a Quick-Change Wheel Release which allows tool free wheel removal without need for a wrench. It has a 2-position removable side handle that provides increased comfort and control. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Applications include: Grinding and cleaning up welds, weld and steel surface preparation, sanding metal for various metal fabrication projects. Includes the One-Touch Guard and Hex Wrench.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt 4 Inch Grinder 18 V, eg:

• What are Top 10 Dewalt 4 Inch Grinder 18 V for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt 4 Inch Grinder 18 V to buy?
• What are Top Rated Dewalt 4 Inch Grinder 18 V to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt 4 Inch Grinder 18 V?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt 4 Inch Grinder 18 V.
• Before deciding to buy any Dewalt 4 Inch Grinder 18 V, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt 4 Inch Grinder 18 V and What you should consider when buying the Dewalt 4 Inch Grinder 18 V and Where to Buy or Purchase the Dewalt 4 Inch Grinder 18 V. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt 4 Inch Grinder 18 V of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt 4 Inch Grinder 18 V.