100workfromhome We spent many hours on research to finding clamp meter dewalt, reading product features, product specifications for this guide. For those of you who wish to the best clamp meter dewalt, you should not miss this article. clamp meter dewalt coming in a variety of types but also different price range. The following is the top 10 clamp meter dewalt by our suggestions
665 reviews analysed
DEWALT DWHT83192 Large Trigger Clamp with 6 inch bar
Dewalt DWHT83192 6-Inch 300-lb Clamping Force Large Trigger Clamp
Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter with AC/DC Voltage&Current, Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect
- ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
- ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
- ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows “OL” on the LCD If Overload
- ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
- ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
Electrical Maintenance and Test Kit Klein Tools CL110KIT
- Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
- Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Line splitter allows the measuring of current draw up to 15A without splitting the load’s power cord
- CAT III 600V, Class 2, Double insulation safety rating
- AC Auto-Ranging 400 amp digital clamp meter
- Backlit display for clear readings
- Includes a case, test leads and batteries
Klein Tools Clamp Meter Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of voltage. The kit includes a carrying pouch, test leads and batteries. Includes a case, test leads and batteries. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn’t just the name of our company, it’s also our family name. And since we’re an American company that’s family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn’t just make great products, we make great products that stand up to the demands of the professionals who use them every day … Since 1857.
Etekcity Digital Multimeter, MSR-C600 Auto-Ranging Clamp Meter
- Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity tests
- The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
- Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
- Comes with a handy carrying pouch, perfect for use while you’re on the go
- Automatically enters sleep mode after 15 minutes of inactivity for energy conservation
- 1-year warranty and lifetime support from Etekcity
Edacity’s Digital Clamp Mustimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The mustimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup mustimeter for entry-level electricians, hobbyists, and general household /Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation Display: Maximum display 1999Range selection: Auto ranging Overload display: Display OL or Measurement Speed: Updates 3 times/ Opening: 28mm diameter Tested Max. Current Conductor Size: 26mm diameter Diode test: Yes Continuity test: Yes Battery Life: about 150hours (alkaline battery)AC Current:-Range and Accuracy: 2A{4A, ± (2%+8)}, 200/400A ± (1.5%+5)- Overload Protection: 400A rams AC Voltage:- Range and Accuracy: 2/20/200V ± (1.2%+5), 600V± (1.5%+5)- Input Impedance: 10 MΩPackage Includes1 x Edacity Digital Clamp Meter2 x Test Leads (a pair)2 x AAA 1.5V batteries (installed)1 x Carrying Bag1 x User Manual
Digital Clamp Meter AC/DC Auto-Ranging 600 Amp Measures Voltage, Resistance, Temp, More Klein Tools CL800
- Automatically ranging true mean squared (TRMS) technology for increased accuracy
- Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
- Thermocouple probe measures temperature
- Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
- CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
- Built to withstand a 6.6-Foot (2m) drop
- Low battery indicator and easily accessible battery compartment
- Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C)
- Operating altitude to 6562-Foot (2000m)
- Includes carrying pouch, test leads, thermocouple with adapter and batteries
Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Built to withstand a 6.6-foot (2m) drop. Low battery indicator and easily accessible battery compartment. Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C). Operating altitude to 6562-foot (2000m). Includes carrying pouch, test leads, thermocouple with adapter and batteries. Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn’t just the name of our company, it’s also our family name. And since we’re an American company that’s family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn’t just make great products, we make great products that stand up to the demands of the professionals who use them every day … Since 1857. Voltage – 1000V AC, 1000V DC
UEi Test Instruments DL369 Digital Clamp-On Meter
Product Description
The PHOENIX Clamp-On Meter series starts with the DL369, the perfect meter for contractors who need basic features without all the extras. Great for general troubleshooting and electrical maintenance, this isn’t just a stripped down model, the PRIME is a fully functional tough meter made to get the job done
From the Manufacturer
UEi Test Instruments has over 50 years’ experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. Professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi backs its products with dedicated technical support, service and repair teams.
Clamp Meter Amp meter Digital Multimeter 4000 Counts with NCV Auto-Ranging Testing AC/DC Current&Voltage, Continuity Electrical Tester, Diode, Resistance, Capacitance, Frequency- Tacklife CM01A
- ▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz)
- A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
- ▲Non-Contact Voltage Detection & Overload Protection – If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V)
- Only when testing current, the flashlight of multimeter shines
- Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
- ▲Multifunctional & Easy to read – High-Definition Large Back-lit LCD provides better visibility in dark working area
- ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement
- Automatically enters sleep mode after 30 minutes of inactivity for energy conservation
- Data hold function
- Low battery indicator
- ▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use
- The test leads are easy to grip
- The design is Ergonomic and portable for easy use, perfect for both professional or new users
- ▲ What You Get: 1x Tacklife CM01A digital clamp meter, 2x Test Leads, 3x AAA Batteries, 1x user manual, 24 months warranty
- Be assured of purchase Tacklife CM01A digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problem
Clamp Meter, Digital Multimeter 600 Amp TRMS 6000 Counts NCV with AC Current AC/DC Voltage Test Resistance Continuity Capacitance Temperature Measure Auto-Ranging – Tacklife CM02A
- ❤You can return/replace this clamp meter purchased here within 24 months without giving any reason❤
- ▲SAFE AND QUICK MEASUREMENT – Auto Ranging accurate measures AC current to 600 A, AC and DC voltage to 600V, resistance to 6000Ω, temperature tester,quick response， perfect troubleshooting tool to help you solve automotive or household electrical problems quickly and safely
- ▲SPECIAL LOW IMPEDANCE TEST FOR HIGHER ACCURACY – Measure the blocked voltage when connected to the wire for more accurate measurement. Low Pass Filter, measuring low frequency signals with the tip clamp. Work is more convenient, improve your life quality
- ▲BRIGHT BACKLIGHT DISPLAY – With the backlight display to read and record easily under dark areas. Automatically enters sleep mode after 10 minutes of inactivity for energy conservation. Devoting to optimize user experience, perfect for both professional or new users
- ▲DATA HOLD AND CARRYING CASE – Data retention and backlight buttons on the side of the amp meter make it easy to take readings while you operate. The meter is equipped with a carrying case that you carry and save
- ▲PACKAGE CONTENT: 1 x Tacklife CM02A Advanced Clamp Meter, 1 x K-Type Thermocouple, 1 x Test Leads (Pair), 2 x 1.5V AAA Batteries, 1 x User Manual, 1 x Cloth Pouch, 1 x 24-Month After-sale service card
Bluetooth AC DC Clamp Mutlimeter Amp Meter with Temp Testing, Auto-ranging Measures Current, Voltage, Resistance, Capacitance, Continuity, Amperage, Volt, Ohm Clamp-on Ampmeter (BTMETER BT-570CAPP)
- ⚡【AC & DC Digital Clamp Multitester】 4000 Counts Auto-range AC/DC amps clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance,capacitance, audible beep continuity, Temperature, diode and Frequency(Hz),Duty Cycle, Data Hold.
- ⚡【Bluetooth APP Clamp Ammeter】 Auto pair with Android / IOS phone,support for real-time measurement reading in Max/Min/Average, with timing and curve graph. And save the measurements in TXT/Excel files for data logging
- ⚡【AC/DC Inductive Clamp Amp Meter】Neat Bright Backlit LCD display, Big Jaw Caliber Size 1.77 inches. Make sure press “REL” to zero out the meter before clamping, or the meter will show bias numbers without any wire in the clamps due to the magnetic field.
- ⚡【Accurate Voltage Amperage Meter】0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading for low and high current. Ideal non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis
- ⚡【Clamp On Live Wire for AC DC Amp Test】To measure amp with ANY clamp meter, you MUST separate the hot and neutral conductors or they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter
Why BTMETER BT-570CAPP Pro Clamp Multi-tester?
- Free APP available for download on App Store,Google Play, Life-time support
- Average sensing, calibrated to rms of sine wave on AC Voltage, AC Current test
- It won’t auto shut down to support continuous measuring, data logging and then export the data in excel or txt file.
- It’s compact, easy to use, comes with all accessories to start (9V battery, thermometer probe, test leads, multimeter case)
- Fast responding data to your phone via Bluetooth APP, display all measurement and generates analog waveform graph on APP
Range and Accuracy:
- Range Selection: Auto Ranging
- DC Voltage: 400mV,4V,40V,400V(Accuracy: +/- 0.5% + 2 digits); 1KV(Accuracy: +/- 0.8% + 2 digits)
- AC Voltage: 4V,40V,400V(Accuracy: +/- 0.8% + 3 digits); 750V(Accuracy: +/- 1.2% + 3 digits)
- DC Current: 200A(Accuracy: +/- 3% + 10 digits); 1000A (0~800A: +/- 3.5%+10 digits; 800~1000A: +/-6.5%+10 digits)
- AC Current: 400A(Accuracy: +/- 3% + 10 digits); 1000A(0~800A: +/- 3.5%+10 digits; 800~1000A: +/-6.5%+10 digits)
- Resistance: 400Ω(Accuracy: +/- 1% + 3 digits),4000Ω,40KΩ,400KΩ,4MΩ(Accuracy: +/- 1% + 2 digits) 40MΩ(Accuracy: +/- 1.5% + 3 digits)
- Capcitance:51.2nF(Accuracy: +/- 3% + 3 digits), 512nF,5.12uF,51.2uF(Accuracy: +/- 2.5% + 5 digits); 100uF(Accuracy: +/- 5% + 10 digits)
- Frequency:5.12Hz, 51.2Hz,512Hz,5.12kHz,512kHz,5.12mHz (Accuracy: +/- 0.1% + 5 digits)
- Duty cycle:0.1%~99.9%
- Temperature:-20℃~-1000℃(-20~ 150℃ Accuracy: +/- 3℃ + 1 digits ; 150~1000℃ Accuracy: +/- 3%+ 2 digits;)
B&K Precision 316 Mini AC/DC Clamp Meter, 12.5mm Clamp Opening size
- Digital clamp meter measures AC and DC current to 100 amp, AC and DC voltage to 600V, and resistance to 10 kilohms
- Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
- Clamp with 12.5mm jaw opening measures current without touching or interrupting the circuit
- Peak hold function records the maximum measurement of a current surge
- Meets IEC safety standard 61010, and is rated for CAT II installations to 600V and CAT III installations to 300V
The B&K Precison 316 mini digital clamp meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC and DC current to 100 amp. The clamp has two jaws that can close around an electrical conductor up to 12.5mm in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V and resistance to 10 kilohms. The peak hold function records the maximum measurement of a current surge. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. Its zero function allows a measurement to be set as a reference value for subsequent measurements. An audible continuity sensor confirms that the circuit conducts electricity. The meter has a rotary switch to select the property to measure, and a four-digit LCD that shows readings. It can output an analog signal for reading measurements on a secondary device, such as an oscilloscope. The unit operates on two AA batteries, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.
This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is rated for CAT II installations to 600V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners) and CAT III installations to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a battery, a test lead set, a carrying case, and instructions.
Specifications
| Maximum AC input | 100 amp |
| Maximum DC input | 100 amp |
| Maximum AC voltage input | 600V |
| Maximum DC voltage input | 600V |
| Maximum resistance detected | 10KΩ |
| Installation rating | CAT II, 600V; CAT III, 300V |
| Standards met | EN safety standard 61010, CE marking |
| Power supply | (2) AA batteries |
| Weight | 180g |
| Dimensions | 202 x 70 x 34mm/7.95 x 2.76 x 1.33 inches (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Clamp meters, also called clamp-on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.
What’s in the Box?
- B&K Precision 316 Mini AC/DC clamp meter
- (2) 1.5V batteries
- Test lead set
- Carrying case
- Instructions
Conclusion
By our suggestions above, we hope that you can found Clamp Meter Dewalt for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Clamp Meter Dewalt, eg:
- What are Top 10 Clamp Meter Dewalt for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Clamp Meter Dewalt to buy?
- What are Top Rated Clamp Meter Dewalt to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Clamp Meter Dewalt?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Clamp Meter Dewalt.
- Before deciding to buy any Clamp Meter Dewalt, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Clamp Meter Dewalt and What you should consider when buying the Clamp Meter Dewalt and Where to Buy or Purchase the Clamp Meter Dewalt. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Clamp Meter Dewalt of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Clamp Meter Dewalt.
