100workfromhome 
Best results for angle grinder for knife making
Bosch 4-1/2 Inch Angle Grinder GWS8-45
$49.00
$57.33
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- COMPACT: Weighing only 4.2 lbs., the Bosch GWS8-45 Angle Grinder is lightweight and compact. Its slender grip circumference allows users to work comfortably for longer.
- POWER: The angle grinder features a powerful 7.5-amp motor to produce 11,000 no-load rpm for professional cutting and grinding applications.
- ERGONOMIC: With its slim-grip design, the GWS8-45 angle grinder provides outstanding user comfort. Its two-position side handle allows for greater control and utility.
Makita GA4530 4-1/2-Inch Angle Grinder
$53.57
$64.28
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications
- Compact design at only 4.0 lbs. for reduced operator fatigue
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Slide switch design with lock-on for added user convenience
- Protective zig-zag varnish seals the armature from dust and debris for longer tool life
Work Sharp WSSAKO81112 Blade Grinder Attachment
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
$499.00
$713.57
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
Work Sharp WSSAKO81111 Tool Grinder Attachment
Surgi-Sharp 1"x30" Leather Belt Knife Sharpening Kit with Surgi-Sharp Universal Angle Guide SS10 and Abrasive Belts High Grit 400, 600, 800, 1000 with Compound
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
$204.99
$231.64
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
INSMA 2 inch Roloc Quick Change Discs 30Pcs Sanding Discs 1Pcs 1/4” Holder, Surface Conditioning Discs, for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint Removal
$16.89
$20.61
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- Nonwovens
- 【High Performance for Various Work】 Come with a 1/4 inch shank roloc disc holder, 30pec Fine/Medium/Coarse cutting abrasive discs, fits various surface conditioning and preconditioning, oil paint removal, rust removal, glue or adhesive removal, self-sharpening, sanding, cleaning, grinding, stripping, deburring, polishing, finishing,etc.
- 【Quick-change & Steady Design】 With unique safety torque spiral, the connection between sanding disc and holder/tray get firmly when rotating, ensures steady working and no fall out. Roll lock quick-change design, just twist it to remove or connect.
Work Sharp Guided Sharpening System
$31.99
$45.43
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- PIVOT-RESPONSE TECHNOLOGY - allows you to use the same sharpening technique for curved & straight blades. With pivot-response engaged, the entire diamond plate pivots to follow the edge profile, successfully creating a consistent edge along the entire length of the blade
- PRECISION ANGLE GUIDES - interchangeable angle guides establish optimum sharpening angles. Guides are easily flipped from 17° to 20° to accommodate a wide range of knives. Magnets secure the guides during sharpening & interchanged without tools or calibration
Work Sharp Knife & Tool Sharpener Ken Onion Edition – sharpening angles from 15° to 30°, flexible abrasive belts, variable speed motor, multi-positioning sharpening
$127.00
$187.96
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- ADJUSTABLE SHARPENING GUIDE - produce precise edge bevels from 15° to 30°. motor- 120Vac/1.5 amp. Duty cycle-1 hr Continuous
- VARIABLE SPEED MOTOR - handle every sharpening task, from grinding to honing. More power with improved cooling & the option of slow speed honing or high speed grinding
- PREMIUM FLEXIBLE ABRASIVE BELTS - deliver a strong, long lasting razor-sharp convex edge
- FAST, PRECISE, & REPEATABLE - sharpening results with no set up or calibration time. The 6000 grit belt measures ½ x inches) for better contact with Serrations, gut hooks and other hard to reach edges
MultiTool 36" x 2" Belt Grinding Attachment
$214.00
$261.08
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- EFFICIENT: Superior performance and a user-friendly belt change of under 5 seconds produce better quality with less downtime.
- VERSATILITY: Grinding, sanding or polishing in 4 positions on rubber contact wheel, flat paten, disc or free-strapping. The unit can be swiveled vertically or any position in between.
- ACCURATE TRACKING: The running position of the belt is simple to adjust and it stays there, allowing for quality finishing.
TOVIA 3 Teeth Wood Cutting Shaping Disc for Angle Grinder,Multipurpose Carving Wheel,Stump Log Grinder Attachment with 7/8" Arbor
$16.60
$18.26
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- Three tungsten carbide teeth ensure safe work with the blade by creating the acceptable value of radial resistance at high rotation rate
- Special anti-kickback design. Designed especially for working at high RPM rates (up to 12 200 RPM).
- No overheating of the blade even during continuous work
- Smooth grooving with a clean cut is ensured by the unique shape of the teeth
- Multi-purpose cutting for wood board,MDF,chipboard,laminate flooring,plasterboard,plywood.Remove material quickly and fast.Wood carvers CHOICE.
WEN 6307 Variable Speed Detailing File Sander with 1/2-by-18" Belt
$35.17
$42.91
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute
- Auto-tracking belt system requires no tensioning or adjustments
- Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project
- Tool-free belt installation makes for quick and easy belt changes during the job
- Includes three abrasive sanding belts, a dust port attachment and a two-year warranty
Grinding Wheels – Flap Grinding Wheels For Angle Grinder – 5 Piece 4 ½ Finish work, deburring, and light grinding Size 4 1/2” X 7/8- Grit Aluminum Oxide: Grit #40, 60, 80, 120, 180, Katzco
Angle Grinder, GALAX PRO 6 Amp Grinder Tool with 2pcs 4-1/2 Wheels(Cutting Wheel and Grinding Wheel), Side Handle, for Removing Paint & Mortar, Sanding, Cutting, Grinding
$29.99
$36.89
Amazon.com
Last update was on: December 24, 2024 6:02 pm
- ▲POWER AND FLEXIBILITY - 6 amp motor delivers up to 12,000 RPM for tough jobsite applications
- Removable handle could be installed on both right and left side, offering added guide and well balance
- ▲CONVENIENT & WIDE APPLICATION - Spindle lock for quick and easy disc and accessory changes. Widely used for metal cutting and grinding, stone slabs cutting and grinding, tiles cutting and grinding. This angle grinder also ideal for sanding back metal surfaces, removing rust or paint and preparing a metal surface for a new coating
