100workfromhome 
Best results for craftsman table saw instructions
DEWALT DWE7491RS 10-Inch Jobsite Table Saw with 32-1/2-Inch Rip Capacity and Rolling Stand
Delta Power Equipment Corporation 847962005250 Fence System
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- One piece square tubular rail
- Mounting design attaches to Delta table saws including Contractor Saw, Hybrid Saw, and Unisaw models
- Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0.4mm)
- Easy-gliding, steel tube fence body to handle quick, precision ripping, and square cuts
- Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments
Kreg KMS7102 Table Saw Precision Miter Gauge System
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
MJ SPLITTER Table Saw Safety Splitter and Riving Knife Alternative for Zero Clearance Insert
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- Popular aftermarket table saw splitter for preventing kickback on table saws (for Thin Kerf Saw Blades Only)
- Voted Best Tool by Popular Woodworking (2004) for Table Saw Safety!
- Installs directly to wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Simple instructions and installation drill guide included
Shop Fox D2275 Tool Stand
Delta Uni-Saw Contractor Large Grizzly Phenolic Zero Clearance Insert for Table Saws 13-3/8” x 3-3/4” x 1/2”
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- Insert Dimensions: 13-3/8” x 3-3/4” x 1/2”. Actual Color May Vary
- Made from high-density phenolic laminate with a bonded-melamine surface
- Delta Uni-Saw/Contractor/Large Grizzly insert fits various models of table saws.
- Includes leveling screws, side and end adjustment screws
- rear safety tab
- pre-cut blade bottom pocket
BORA Portamate PM-4000 – Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- A cut above - the Bora porta mate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
- Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Craftsman 21833 Table Saw Zero-Clearance Insert CR-4
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- LEECRAFT Model Number CR-4
- Fits Craftsman 21833, Grizzly G0715P, Dayton 4KXD1, Masterforce 240-0036 table saws
- 15-1/8" x 4" x 1/8" thick with pre-milled blade, dado and riving knife slot
- Precision machined from melamine faced high density phenolic laminate
- Installation instructions included
O’skool 18 Inch Miter Gauge Fence system
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- 18" long bar fits any standard 3/4" x 3/8" track ot T-slot.
- 18" long aluminium fence complete with flip-up length stop.
- Four sprung loaded ball bearings keep the bar snug in the track
- the fence runs true without side-play.
- Clear easily read scale for setting any intermediate angle.
- Features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°.
Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar Equipped with Adjustable Spring Loaded Plungers and Removable Retaining Disc
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
Bosch TS2100 Gravity-Rise Table Saw Stand
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- 8-Inch treaded wheels - handles rough terrain
- Universally adaptable - mounting holes for competitors' table saws - DeWALT, Makita, Hitachi, Craftsman, Ridgid
- Gravity-Rise stand - Bosch exclusive design for easy table saw setup and table down
- Exceptional portability - quick and easy transport between job sites
- Heavy duty construction - withstands 250 lbs. of downward force
Refurbished POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- Sturdy Extruded aluminum construction means it's solid and durable
- Provides for straight parallel cuts.
- By using the handy adjustable cam, the clamp can adjust from 11-1/8-Inch up to 11-13/16-Inch
- Simple, effective cam lever action means device is securely locked in place
- Arrives fully assembled, right out of the package
MJ SPLITTER SteelPro TK
Amazon.com
Last update was on: June 19, 2025 8:10 pm
- America's most popular aftermarket table saw splitter for preventing kickback (for thin kerf saw blades only)
- Installs directly to wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Automatic Kerf Keeper prevents reactive wood from binding on the saw blade
- Simple instructions and installation drill guide included
