100workfromhome 
Best results for 5 mm tapping drill
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$16.53
Amazon.com
Last update was on: November 23, 2024 7:48 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Hymnorq 7/32 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 10pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, for Drilling in Stainless Steel and Iron
$16.56
$19.87
Amazon.com
Last update was on: November 23, 2024 7:48 am
- Cobalt Steel - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- For Stainless Steel - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
XT AUTO Spiral Flute Hss Combination Countersink Screw Tap Tapping Drill Bit Set 1/4" hex shank Hand Tool Kit for Wood Plank Aluminum Plate Sheet Iron
$9.99
$14.49
Amazon.com
Last update was on: November 23, 2024 7:48 am
- High Speed Steel - Made of high quality 4241 HSS for durability
- Suitable for drilling and tapping in aluminum, brass, copper, plastic, wood, steel, etc.
- Three Functions in One Bit ¨C Drill, tap and countersink in a single pass to save your labor and precious time
- The point is self-centering and eliminates the need for center drilling or center punching
- Hex Shank - Quick-change 1/4" (6.35mm) hex shank with SAE sizes engraved on the tap drills for easy recognition.
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$50.59
Amazon.com
Last update was on: November 23, 2024 7:48 am
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
Norske Tools NMAP001 13" Laminate Flooring and Siding Cutter
$100.12
$136.16
Amazon.com
Last update was on: November 23, 2024 7:48 am
- 13" cutting capacity
- Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank , Cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
- Compact and easy to use
- produces clean, precision cuts with no splintering and smooth finish
- Sturdy high-quality steel and aluminum construction
- Extended handle for increased leverage
XT AUTO 6pcs HSS Metric Hex Spiral Flute 2-in1 Combination Drill and Tap Bit Set M3-M10 with 1/4" Hex Shank Set
$9.99
$11.29
Amazon.com
Last update was on: November 23, 2024 7:48 am
- 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements
- Drilling, tapping and deburring/countersinking in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Quick change 1/4 Inch (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
Greenlee DTAPM5C Combination Drill and Tap Bit, M5
$9.75
$13.26
Amazon.com
Last update was on: November 23, 2024 7:48 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Big Gator Tools MDG1000NP V-Drill Guide
$24.67
$32.56
Amazon.com
Last update was on: November 23, 2024 7:48 am
- Universal & portable V-Drill guide provides perpendicular alignment of drill bits on flat, round or square materials
- Includes 17 metric drill sizes: 3mm, 3.3mm, 3.5mm, 4mm, 4.2mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm
- Heat-treated nickel alloy steel provides durability & accuracy
- Precision ground base provides perpendicular alignment of drill bit on flat surfaces
Hanson 1788680 Pts Tap Plus Drill Combo 6mm-1.00/Number 9 for Tap Die Extraction
6Pcs/Set Hex Shank Drill Bits HSS 4341 Combination Drill and Tap Bit Screw Tap Deburr Countersink Bit (6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC)
$13.99
$15.95
Amazon.com
Last update was on: November 23, 2024 7:48 am
- 6Pcs Hex Shank Drill Bits Set Inculued Size: 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm)
- Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.
- Suitable for Low Hardness Materials Such as Wood, Aluminium Plate, Plank, Plastic, or Sheet Iron (thickness of less than 3mm).
- One-step Processing, Drilling, Tapping, Deburring and Countersinking in One Operation, Working Efficiently and Saving Time and Labor.
Combination drill and tap bit set RUIMI metal deburr countersink drill bit 1/8”-3/8”
$8.99
$11.69
Amazon.com
Last update was on: November 23, 2024 7:48 am
- Hex Shank HSS Drill Bit & Screw Tap of Imperial Unit
- Made from hardened high-speed steel vs carbon steel for longer life
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor & time
Happybuy 6T 22.5-61.5mm Electrical Metal Stud Knockout Punch Kit CC-60 Steel Stud Hydraulic Knockout Puncher Set Dies From 0.9 inch to 2.4 inch Conduit Punch Hole Punch 20GA Sheet Stud Knockout Punch
$150.99
$167.60
Amazon.com
Last update was on: November 23, 2024 7:48 am
- 【Compact Size】- This manual tapping machine is equipped with two drill bits, which is compact and easy to carry. It can save space when placed at home, and it will not become a burden when going out.
- 【Six Drill Bits】- The six drill bits can drill holes from 0.9 inch to 2.4 inch respectively, which can drill both large diameter holes and small diameter holes, which fully meets daily needs.
- 【Run Smoothly】- Smooth operation, clean hole edges, round and lovely holes, uniform hole size, easy to use, light and effortless.
