100workfromhome 
Best results for drill size 1 4 pipe tap
Century Drill and Tool 95202 Plug Hand Pipe Tap, 1/4-18 NPT
Century Drill & Tool 93202 1/4-18 NPT Tap and 7/16" Drill Combo Pack
$13.98
$15.38
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Tap and drill Combo pack offers correct drill size for the tap in one convenient package
- Tap offers precision cut threads, accurately formed for consistent, exact threading
- Tap is heat treated and tempered for file hard threads, and longer, useful life
- Tap designed for hand cutting applications
- Drill bit made of premium grade high speed steel
Uxcell a15012200ux0336 G 1/4-19 BSP 55 Degree Pipe Thread HSS Tap 4 Straight Flutes
Vermont American 203711/8-27 NPT High Carbon Steel Pipe Tap
Vermont American 20352 1/4-18 NPT High Carbon Steel Pipe Tap Bulk
$10.94
$14.11
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- High carbon steel pipe taps are ideal for pipe fittings, cutting internal threads and wherever an extremely tight fit is required.
- Taper taps have 8 to 10 threads chamfered for easy starts in tough materials.
- Four flute design on all taps ensures fast and easy chip clearance.
- Required drill size is permanently etched on the tool for quick and easy reference.
Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz
$9.48
$12.23
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Non-Spray cutting fluid
- Use for tapping, threading, drilling and reaming
- Use on ferrous metals and non-ferrous alloys
- Apply directly on the work surface
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!
ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads
$46.99
$56.86
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards
- SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75
- UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2
Drill America 1-1/4"-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series
$32.49
$37.36
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" in Wooden Case
$58.59
$65.62
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
uxcell Machine Tap 1/4-18 NPS Straight Pipe Thread 4 Flutes High Speed Steel
$12.89
$17.53
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Thread Size: 1/4-18 NPS
- Thread Length: 30mm / 1.18 inch
- Shank Side Width: 8.8mm / 0.35 inch
- Material: HSS (High Speed Steel)
- Total Length: 94mm / 3.7 inch
- Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
Hanson 1903ZR Tap 1/4"-18Npt Taper, for Tap Die Extraction
$8.18
$9.90
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Each taper tap is used to cut internal threads in pipes
- This taper tap is ideal for pipe fittings
- Taps are tapered at a rate of 3/4 inches per foot
- Nominal size of the tap is that of the pipe fitting being tapped
- 1/4" size with 18 NPT (National Pipe Taper)
American Tool Exchange Irwin Hanson 1/4” – 18 NPT Tap + 7/16” Drill Bit (AHN-80260)
Best Choice 40-Piece Tap and Die Set – SAE Inch Sizes | Essential Threading Tool with Storage Case
$26.99
$34.01
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- PREMIUM MATERIAL AND DURABILITY: Industrial grade GCr15 bearing steel construction ensures durability and tool longevity
- EXCELLENT CUTTING PERFORMANCE: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- TAPERED TEETH DESIGN: Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Irwin 80230 Hanson 1/4"-20 NC Thread HCS Plug Tap and 13/64" HSS Drill Bit Combo Pack
$7.50
$8.40
Amazon.com
Last update was on: November 22, 2024 1:26 pm
- 1/4"-20NC Tap size / # 7 Drill Bit
- Designed for hand threading work in a variety of materials
- Tap size and drill bit size are etched on each tool for easy identification
- First 3 to 5 threads chamfered for general purpose threading
- Straight flutes are ground to provide rapid chip removal for efficient threading
