100workfromhome 
Best results for 6 drill bit extension
Irwin 88702 6" Extension Bit.
back to menu ↑IRWIN Tools 6-Inch SPEEDBOR Lock N’ Load Quick Change Bit Holder (4935704)
$7.17
$8.60
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Each IRWIN quick-change bit holder features a chrome plated sleeve with a carbon steel body
- Bit extension has a patented jaw design with 6-flatted shanks to hold bits securely
- These bit holders use the Lock-n-Load system for 1-handed quick release
- 1/4-inch quick-change range now holds insert bits
- magnetic for holding
- 6" overall length
Drill America 7/64" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$5.07
$7.00
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Drill America 5/32" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$5.66
$7.58
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Grizzly G9750 Aircraft Extension Drill Length 13-Piece Set, 1/16-Inch, 1/4-Inch by 6-Inch Long
QLOUNI 8Pcs 200mm/8” Extra Long Drill Bits Set HSS Twist Bits 4/4.2/4.5/5/5.2/6/8/10mm Round Shank Wood Working Tool
$14.99
$19.79
Amazon.com
Last update was on: November 24, 2024 3:15 am
- [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
- [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
- [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
105 Angle 1/4-Inch 6mm Extension Hex Drill Bit Screwdriver Socket Holder Adaptor and Multi-function 7mm-19mm Ratchet Universal Sockets 1/4”-3/4” Metric Wrench Power Drill Adapter Set
$13.99
$18.19
Amazon.com
Last update was on: November 24, 2024 3:15 am
- ✓105°Angle Extension 1/4inch 6mm Hex Drill Bit Screwdriver Socket Holder Adaptor, 1/4 inch hex drive shaft is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks,Magnetic 1/4 inch hex socket accepts and holds standard drill and driver bits.
- ✓The gears are mounted in a die cast with 3 durable ball bearings. Strong bulid-in magnetic socket holds standard hex drilling and drive bits, avoid falling.105° designs for tight spaces, extends the power of a cordless screwdriver, max torque: 10n/m.105 degree right angle head, designs for tight spaces, extends the power of a cordless screwdriver.Extends power of cordless screwdrivers-100 in/lbs. torque, 400 RPM.
DEWALT DW1588 6-Inch Extension for DEWALT Spade Drill Bits
ARES 70206 | 6-inch Quick Release Bit Holder | Works With All 1/4-inch Drive Bits | Quick Release Mechanism Makes Changing Bits a Breeze
$10.16
$13.72
Amazon.com
Last update was on: November 24, 2024 3:15 am
- ITEM SPECIFICATIONS: This 1/4-inch Drive Quick Release Bit Holder is constructed from premium Chrome Vanadium steel and features a Quick Release Locking Aluminum sleeve with a super strong magnet for superior bit retention. Our Quick Release Bit Holder also a features a free-spinning black sleeve to allow you to stabilize your bit while in use. The 6-inch-long reach will allow you to get into many harder to reach areas easily!
Drill America 1/8" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$7.97
$9.01
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Drill America 1/8" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
$5.03
$5.58
Amazon.com
Last update was on: November 24, 2024 3:15 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
MTP 12" & 6" Core Bit Extension 1-1/4" – 7 UNC Thread for Concrete CORE Concert Drill Male-Female Coring Core Drill Extension Tube
Neiko 00228A Socket Adapter Extension Set, 3Piece | 1/4, 3/8/ 1/2" Impact Drive, CR-V Steel | 6" Length Compatible with Power Drills & Drivers
$11.99
$17.27
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Quarter inch hex shank is compatible with Power corded and cordless impact drivers and drills, including right angle drills, for greater torque application over hand ratchets
- Made of Highly Durable Chrome vanadium steel and coated with corrosion resistant black phosphate for extended use and durability against heavy duty environments
- All pieces are outfitted with a spring loaded detent bearing ball that locks onto sockets to ensure a secure fit into the driver head to prevent slipping and loosening
Titan Tools 16006 6" Quick Release Extension Bit Holder
$7.49
$11.09
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Extended driver for hard to reach areas
- Outer sleeve allows for holding and directing the tool without any discomfort
- Locking, magnetic, low profile, quick release bit holder
- 6" extension length helps reduce back strain
- Auto locking drive
Bosch DSBE1006 DareDevil 6-Inch Spade Bit Extension
$8.66
$12.82
Amazon.com
Last update was on: November 24, 2024 3:15 am
- The item is Bosch DSBE1006 Daredevil 6-inch spade bit extension
- Used for power tool accessories, drill bits & accessories
- The product is manufactured in China
- Features a full cone threaded tip for fast and effortless drilling
- Contoured paddle for fast chip removal
- Hex shank power Groove to reduce slippage
Maxtech 50349MX QL3 Quick Change Drill Bit Extension, 6", Black/Blue
Saiper 1/4 Inch Hex Shank Magnetic Screwdriver Bit Holder 2", 4", 6" Quick Change Drill Extension Bit Set for Screws, Nuts and Any Drill and Handheld Driver, Set of 3
$8.39
$12.50
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Chrome Vanadium steel (CR-V)
- [Easy to Use] 1/4" hex shank, quick change and fit all power drills, 1/4" impact drivers and hand-held drivers. 60mm(2”)/ 100mm(4”)/ 150mm (6”)Length, meet your various needs
- [High Quality] Made of Chrome Vanadium steel (CR-V), heat treated high hardness and wear resistance, life time is much longer than the traditional old ones
- [Secured Fit] The socket ends with a magnetic piece that securily attaches onto any hex bit, great for working with hard to reach screws, fast quick release will greatly improve work efficiency
Bosch BL2631 1/16 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit
$2.60
$2.91
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
6” Long Forstner Bit Extension For Adding Over 4" of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction Use
$14.99
$18.89
Amazon.com
Last update was on: November 24, 2024 3:15 am
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like a larger vase or vessel can be very challenging with a standard length forstner bit. With the 6” long 4” of extra drilling depth to your current forstner bits!
- With the 6” long 4” of extra drilling depth to your current forstner bits! That alone makes this extension especially ideal for woodturners when having to hollow out larger vessels or objects like salt and pepper shakers. The extension also works great for rustic furniture, joining wide timbers, wooden beverage mugs and even works great on things like turned kaleidoscopes.
