100workfromhome 
Best results for 5.6 mm drill bit
Viking Drill and Tool 34010 Type 643-D 135 Degree Split Point M42 Cobalt Drill Bit (10 Pack), 5.60mm
$8.40
$10.25
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Metric M42 Cobalt Jobber 135-Degree Split Point NAS 907 J
- 135-Degree split point for accurate centering and fast penetration
- Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
- M-42 Cobalt contains 8-percent cobalt
- NAS 907J Cobalt Jobber Length
Cobra Carbide 30562 Micro Grain Solid Carbide Jobber Regular Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Four-Facet Point, 5.60mm Size, 75mm Length (Pack of 1)
$19.03
$23.79
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Cleveland 2001G Style High Speed Steel Jobbers’ Drill Bit, Black Oxide, Round Shank, 118 Degree Point, 5.6mm Size (Pack of 12)
$46.08
$56.68
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Vanadium steel for greater heat resistance than high-speed steel (HSS)
- Black oxide improves lubricity, resists corrosion, and resists flaking, and also helps prevent buildup of material on the tool's cutting edge
- Jobber-length, for a wide range of applications
- 118-degree conventional point angles, for general drilling applications
- Round shanks, for use with a variety of tool holders
- Made in the USA
uxcell 10mm Drilling Dia 130mm Length M35 HSS Cobalt Round Shank Twist Drill Bit 2pcs
Precision Twist 2A High Speed Steel Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Conventional Point, 5.60mm (Pack of 12)
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Jobber-length, for a wide range of applications
- 118-degree conventional point angles, for general drilling applications
- Round shanks, for use on a variety of tool-holding systems
- Uncoated (bright), for use with a wide range of drilling materials
- High-speed steel (HSS), for use on a wide variety of materials
CTD Metric Magnum Super Premium 5mm Drill Bit (2 Pack)
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Made in USA - Metric Jobber Length Drill Bit - 3 5/8" Length, 2 7/16" Flute Length
- Special Hi-Molybdenum tool steel. 135 degree split point for fast penetration and accurate starting without center punch.
- Precision ground: point, flutes, body, clearance, and drill diameter for the ultimate in accuracy and performance.
- Body and clearance are gold surface treated for maximum lubricity.
- Heat treated at 2185 F and then nitro-carburize finished at 950 F to be measurably harder than high speed steel.
uxcell 9mm Dia HSS Cobalt Straight Round Shank Metric Twist Drill Bit Drilling Tool
10 Pack .35mm X 5.6mm CNC Jewelry Japanese Micro Drill Bits Dremel Toy Making Model Cars Trains Trucks Installation Woodworking Crafts Circuit Boards Made in Japan
uxcell 5.6mm Twist Drill High Speed Steel Bit HSS-4241 for Steel, Aluminum Alloy 5pcs
$7.71
$9.71
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- PRODUCT NAME - Twist Drill Bit.
- MATERIAL - High Speed Steel 4241
- PARAMETER - Bit Diameter : 5.6mm/0.22"
- Cutting Edge Length : 65mm/2.56"
- Total Length : 94mm/3.7"
- APPLICATION - Perfect for stainless steel, copper, aluminum alloy,as well suit for wood,plastic.
Dormer A976 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 5.60mm
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Extra-length drill bits have longer flutes and overall lengths than Jobber drill bits, for deeper holes
- 130-degree point angle has good centering capabilities and reduces pressure on cutting edges
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- Uncoated (bright) finish with Smooth-Flow coating reduces coefficient of friction, has efficient chip evacuation and extends tool life
Fisch Brad Point Drill Bits (10mm x 133mm) – Premium Drill Bits for Soft, Hard, Veneered and Laminated Wood, MDF and Acrylic Glass – Beveled Edge for Fast, Easy Cutting – FSF-004097 – Made in Austria
$14.01
$17.23
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
- Beveled edge leads to a perfect drilling of the diameter without any deviation
- For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass
- Made in Austria
Autoly Dia 2.5mm HSS Cobalt Metric Twist Drill Bit Set M35 Metal Straight Shank Electrical Drill Bit,Pack of 10
$8.99
$12.68
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Material - Twist drill bits are made of M35 cobalt steel ,added with molybdenum and cobalt so they can be formed to hardened alloy with heat resistance and wear resistance.
- Dimension - Total length: 56mm / 2.2"
- shank diameter: 2.5mm / 0.1''
- Straight Shank - Straight shank allows for secure and precise centering for electric and cordless drills and rotary drills.
- Precision Grinding -Tip, groove, body, gap and drill diameter for maximum precision and performance.
CTD Metric Magnum Super Premium 6mm Drill Bit (2 Pack)
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Made in USA - Metric Jobber Length Drill Bit - 4" Length, 2 3/4" Flute Length
- Special Hi-Molybdenum tool steel. 135 degree split point for fast penetration and accurate starting without center punch.
- Precision ground: point, flutes, body, clearance, and drill diameter for the ultimate in accuracy and performance.
- Body and clearance are gold surface treated for maximum lubricity.
- Heat treated at 2185 F and then nitro-carburize finished at 950 F to be measurably harder than high speed steel.
ILOVETOOL Diamond Hole Saws Set 8mm Drill Bits for Glass Tile Pack of 10 Pcs
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Hole Diameter:8mm (5/16")；Shank diameter:5.6mm
- Total length:51mm(2")；Drill depth:23mm depth
- Quantity:Total 10 Pcs；Drilling speed:Drill a Holes In Seconds。
- Use with water as a lubricant
- The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
Cleveland 2133 Style Cobalt Steel Short Length Drill Bit, Bronze Oxide, Round Shank, 135 Degree Split Point, 5.6 mm (Pack of 12)
Amazon.com
Last update was on: November 16, 2024 4:43 pm
- Screw machine length, for rigidity and strength
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges
- Straw oxide reduces grinding stress within the tool
- Round shanks, for use on a variety of tool-holding systems
