100workfromhome 
Best results for drill size for 8 screw
6Pcs/Set Hex Shank Drill Bits HSS 4341 Combination Drill and Tap Bit Screw Tap Deburr Countersink Bit (6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC)
$13.99
$20.15
Amazon.com
Last update was on: November 23, 2024 1:43 am
- 6Pcs Hex Shank Drill Bits Set Inculued Size: 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm)
- Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.
- Suitable for Low Hardness Materials Such as Wood, Aluminium Plate, Plank, Plastic, or Sheet Iron (thickness of less than 3mm).
- One-step Processing, Drilling, Tapping, Deburring and Countersinking in One Operation, Working Efficiently and Saving Time and Labor.
FTG USA 3 Pcs Countersink Value Pack same size (#8) 11/64" with Hex Wrench
$16.99
$21.24
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Top Quality material components highly durable:Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention
- 4 cutter #45 Carbon Steel
- #8 countersink featuring a 11/64 inch tapered and fluted drill bit HSS M2
- Drill, countersink and counterbore in 1 step
- the countersink cutter doesn't clog up providing superior speed and clean finish
TACKLIFE 12V Cordless Drill Driver,3/8" Metal Chuck,2 Speeds Compact Drill Set with 13pcs Accessories,2000mAh Lithium Battery Pack and 1Hour Fast Charger,PCD01B
$48.99
$68.59
Amazon.com
Last update was on: November 23, 2024 1:43 am
- ➤ 【COMPACT&LIGNTWEIGHT&FUNCTIONAL】 :No slipping on screw head,more efficient cordless drill driver,2 modes, screwdriving and drilling . 2 Variable Speeds: Low Speed(0-350RPM)for screwdriver, High Speed(0-1300RPM) for drilling. Torque Adjustment Clutch(19+1)
- ➤【LITHIUM ION BATTERY&1H FAST CHARGER】:2000mAh smart management system, 150pcs screw( 6*60mm),150 hole(50mm softwood),and 30 holes( 5mm steel) can be settled lightly with one full charged drill ,1H to be full of energy again
DEWALT DCF680N2 8V Max Gyroscopic Screwdriver 2 Battery Kit
$99.00
$132.66
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Motion-activated Variable Speed & Reversing Control For Precise Fastening Control
- 0rpm-430rpm For Fastening Into Wood, Plastic & Light-gauge Metal
- Adjustable 2-position Handle Allows For Operation In Either In-line Or Pistol-grip
- ¼ inch hex allows for quick screwdriver bit change and holds 1 inch bit tips
- Motion Activation Variable Speed and Reversing Control
- Motion Activated Variable Speed 0 - 430 RPM
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$14.74
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Black & Decker 20V MAX Drill/Driver Impact Combo Kit
$78.13
$107.82
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Part of the black+decker 20V max* battery system
- Drill / Driver features an 11 position clutch with a LED work light to illuminate the work surface
- Impact Driver features a high performance transmission that delivers 1375 in-lbs of max torque
- Quick release 1/4" hex Chuck, 0-3000rpm, 0-3900ipm
- Lightweight compact design on both tools
- Included Components: (1) LDX120 Drill/Driver, (1) BDCI20 Impact Driver, (1) LBXR20 20V MAX* Lithium Ion Battery, (1) Battery Charger, (2) Driver Bits
FTG USA #8 (11/64") Adjustable Wood Countersink
$6.99
$9.58
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Top Quality material components highly durable:Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention
- 4 cutter #45 Carbon Steel
- #8 countersink featuring a 11/64 inch tapered and fluted drill bit HSS M2
- Drill, countersink and counterbore in 1 step
- the countersink cutter doesn't clog up providing superior speed and clean finish
FTG USA #8 (11/64") Adjustable Countersink with Replacement Bit and Hex Wrench – Economy Pack
$9.99
$12.69
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Top Quality material components highly durable:Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention
- 4 cutter #45 Carbon Steel
- #8 countersink featuring a 11/64 inch tapered and fluted drill bit HSS M2
- Drill, countersink and counterbore in 1 step
- the countersink cutter doesn't clog up providing superior speed and clean finish
DEWALT DW2701 #8 Drill Flip Drive Complete Unit
MOHOO Countersink Drill Bits, 7pcs Woodworking Countersink Drill Bits Set, Woodworking Chamfer High-Speed Steel Countersink Drill Bits for Woodworking 3 4 5 6 7 8 10mm With Hex Key
$9.99
$14.79
Amazon.com
Last update was on: November 23, 2024 1:43 am
- ①TRI-POINTED DESIGN: The countersink drill bits set with tri-cuspid centering that make sure drills will not produce offset, not easy to slip, no bias, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly.
- ②HIGH CARBON STEEL MATERIAL: Countersink drill bits are made of high carbon steel which offer high hardness, superior cutting power, good abrasion resistance.
NoCry 10 N.m Cordless Electric Screwdriver – with 30 Screw Bits Set, Rechargeable 7.2 Volt Lithium Ion Battery, 2 Extension Drivers, and a Built-In LED Light
$29.99
$43.19
Amazon.com
Last update was on: November 23, 2024 1:43 am
- POWERFUL 10 N.m MOTOR - Yes, it's 3x more powerful than competitors, but you're still in control thanks to the adjustable 5+1 torque. Plus, the rotation speed is adjustable from 0-230 rpm, and the clutch automatically disengages when the set torque is reached to avoid stripping screws &
- screwing up your home improvement, electrical, carpentry, or construction projects.
- RECHARGEABLE 7.2V DC / 1500mAh LI-ION BATTERY - While similar screwdrivers can handle about 200 screws on a single charge, this one takes care of over 300. Plus, the battery power indicator shows how much juice is left, and you can get from 0 to 100% in just 3-5 hours - 120V charger included.
#8 x 3/4" Stainless Pan Head Square Drive Sheet Metal Self Tapping Drilling Screws, (100pc) 410 Stainless, Choose Size and Qty, by Bolt Dropper.
$9.99
$11.69
Amazon.com
Last update was on: November 23, 2024 1:43 am
- HIGH QUALITY STAINLESS: These Pan Head Sheet Metal Screws are 100% 410 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today.
- SELF TAPPING: Our hardware is very strong and is great for both indoor and outdoor use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications.
BLACK+DECKER 8V MAX Cordless Drill/Driver (BDCD8C)
410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws, (1/2" to 1-5/8" Length in Listing), 100 Pieces, Modified Truss Head Self Driller (#8 x 3/4 inch)
Arkon Heavy Duty Drill Base Mount for Note 8 5 Galaxy Tab 7.0 8.0 iPhone X 8 7 6S Plus iPad mini Retail Black
$29.20
$42.63
Amazon.com
Last update was on: November 23, 2024 1:43 am
- iPhone X 8 7 6S Plus iPhone 8 7 6S Galaxy Note 8 5 S8 S7 compatible
- Spring loaded holder and support legs ensure a perfect fit
- Low vibration 4 Hole AMPS mount attaches with screws to walls and other solid flat surfaces
- 2 year limited warranty
#8 x 1" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches wire Lath to Metal Studs – Box of 100
$6.24
$6.93
Amazon.com
Last update was on: November 23, 2024 1:43 am
- HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear
- RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener
- CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
Bosch Clic-Change 3-Piece Self-Centering Drill Bit Assortment CC2430
$19.80
$23.76
Amazon.com
Last update was on: November 23, 2024 1:43 am
- EFFICIENT: With Bosch’s Clic-Change bit design, the CC2430 bit set allows for quick bit changes and fast, one-handed load and release
- CONVENIENT: The CC2430 bit set offers quick bit changes without re-chucking or the need for tools
- PRECISION: The bit design features self-centering to reduce bit walking and increase precision when drilling
- COMPATIBILTY: The drill bits have a ¼-inch hex shank and can be used with all of your ¼-inch drills regardless of make or model
BLACK+DECKER 12V MAX Cordless Drill/Driver (BDCDD12C)
Esnow 8 Pcs Center Doors Self Centering Hinge Tapper Core Drill,Hole Puncher Woodworking Tool 5/64” 7/64” 9/64” 11/64” 13/64” 5mm 1/4”
$9.98
$11.78
Amazon.com
Last update was on: November 23, 2024 1:43 am
- High quality material: Made of High-speed Steel, with high hardness, rustproof, solid, durable and excellent for use.
- Outstanding design: Unique design with perfect punch effect. Sawdust will be automatically discharged from the top of the holes on both sides, without drill blocked.
- Easy to replace and install: According to the hardness of the wood, you can choose different centering drill, take the screw apart and you can replace the drill easily. At the same time, change bits fast which one-handed load and release.
Kreg SML-C150-500 Pocket Hole Screws 1-1/2-Inch #8 Coarse Washer-Head 500ct – SML-C150 – 500
$16.30
$20.21
Amazon.com
Last update was on: November 23, 2024 1:43 am
- Maxi-Loc washer head
- Great for softer materials like pine, plywood, particle board, MDF and melamine
- Larger threads provide maximum holding power
- Washer head seats flushly in the bottom of the pocket, eliminating pull through
- 1-1/2" screw
