100workfromhome 
Best results for 1/4 20 drill size
Impact Driver, TECCPO 1600In-lbs 20V MAX Impact Drill, 2X2.0Ah Batteries, 1/4" All-metal Hex Chuck, 30 Minutes Fast Charger, 0-2900RPM Variable Speed, Tool Bag Included – TDID01P
$71.99
$80.63
Amazon.com
Last update was on: December 23, 2024 7:42 am
- ????LIMITED TIME DEAL????
- ➤2-YEAR WARRANTY ☎ [email protected]
- ▲ 【5-Min Fast Charger & 2pcs Batteries】 This impact drill features with 2pcs 2000mAh Lithium-ion batteries to keep constant running. 4A charger takes only 5 minutes to 25% charge and around 30 mins for a full charge, which save up to 50% time than others.
- ▲ 【Powerful Torque & Impacts】 High performance 4-pole copper motor delivers 1600In-lbs(180Nm) of maximum torque and 4000BPM of impacts, to meet efficient fastening tasks and large range of applications, help to tackle most screw driving jobs around the house with greater ease
Irwin Tools 2620- 3 Piece High Carbon Steel- Tap 1/4" – 20 NC
Milwaukee 2606-20 M18 1/2" Drill Driver
Milwaukee 2853-20 M18 FUEL 1/4" Hex impact Driver (Bare Tool)-Torque 1800 in lbs
Amazon.com
Last update was on: December 23, 2024 7:42 am
- POWERSTATE Brushless Motor delivers up to 30 percent Faster Driving Speed, increasing users productivity.
- 4-Mode DRIVE CONTROL provides greater control over output speed and power.Most Compact Impact Driver at 4.59" in length providing more access in tight spaces.
Milwaukee 2656-20 M18 18V 1/4 Inch Lithium Ion Hex Impact Driver with 1,500 Inch Pounds of Torque and LED Lighting Array (Battery Not Included, Power Tool Only)
$57.00
$66.69
Amazon.com
Last update was on: December 23, 2024 7:42 am
- LED LIGHTING: Keep your work illuminated with the LED lighting array located just below the quick-connect chuck
- TEXTURED HANDLE: The compact design of this power tool is complemented with the textured rubber grip, which gives you superior handling, even in slippery conditions
- VARIABLE SPEED TRIGGER: Apply pressure to the trigger to match the amount of power you need on the job. This can drive the motor to create up to 3,450 impacts per minute
Milwaukee 2462-20 M12 1/4 Inch Hex Shank 12 Volt Lithium Ion Cordless 2,500 RPM 1,000 Inch Pounds Impact Driver w/ LED Light and Fuel Gauge (Battery Not Included, Power Tool Only)
$44.95
$62.93
Amazon.com
Last update was on: December 23, 2024 7:42 am
- LED LIGHTING: Keep your work subject illuminated with the trigger-activated LED light panel located above and in front of the trigger. Its location prevents any shadows from being cast by your trigger finger
- ONBOARD FUEL GAUGE: LED lights on the side of the impact driver let you know, in increments of 25%, how much battery you have left
- AMBIDEXTROUS BELT CLIP: Whether you’re right or left-handed, you can keep the included belt clip attached on the side of the driver that is most convenient for you
DEWALT DWADT1420 20 UNC Drill Tap, 1/4"
Greenlee DTAP1/4-20 Combination Drill and Tap Bit, 1/4-20NC
$7.92
$11.01
Amazon.com
Last update was on: December 23, 2024 7:42 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Craftsman 20V MAX Cordless Drill and Impact Driver Combo Kit
$123.01
$137.77
Amazon.com
Last update was on: December 23, 2024 7:42 am
- Applies up to 300 lbs. of torque for more than enough power to finish the job
- 1/4" quick connect collet makes it easy to change out bits fast
- 2 20V MAX lithium-ion batteries for cord-free convenience
- A charging station notifies you when the battery is charged and ready for action
- Kit includes 1/2" drill, 1/4" impact driver, rechargeable batteries, charging station and carrying bag
BLACK+DECKER BDCI20C 20V MAX Lithium Impact Driver
$59.00
$84.96
Amazon.com
Last update was on: December 23, 2024 7:42 am
- High Performance Transmission delivers 1375 in-lbs of max torque
- Quick Release 1/4" Hex Chuck
- Compact & Lightweight for ease of use
- Maximum initial battery voltage measured without a workload is 20 volts and nominal voltage is 18
- Included Components: (1) BDCI202, (1) 20v Max Battery, (1) Charger, (1) Screwdriving bit
Milwaukee 2401-20 M12 12-Volt Lithium-Ion Cordless 1/4 in. Hex Screwdriver (Tool-Only)
DEWALT DCF887BR 20V MAX XR 1/4" 3-Speed Cordless Impact Driver TOOL ONLY (Certified Refurbished)
$99.99
$137.99
Amazon.com
Last update was on: December 23, 2024 7:42 am
- DEWALT built brushless motor and XR Lith-Ion batteries deliver more run time and capacity over standard units
- Precision drive in speed 1 for precision applications and added control
- One-handed loading 1/4" hex chuck with easy grip sleeve, accepts 1" bit tips
- 3-speed settings for optimized application versatility
- 3 LEDs with 20-second delay after trigger release, provide visibility without shadows
Porter Cable 20v Max Lithium Ion 1/4" Hex Impact Driver (PCC641 Bare Tool)
$64.50
$91.59
Amazon.com
Last update was on: December 23, 2024 7:42 am
- High performance motor (0-2,800 RPM, 0-3,100 BPM) for quick fastening applications. High torque motor delivers 1,450 in/lbs of torque.
- Compact (6.9" long) and light weight (3.3lbs) allows tool to work in tight areas and minimizes user fatique.
- Quick release 1/4" hex head chuck for easy one-handed bit changes.
- LED light brightens dark work areas.
- Includes one (1) Porter Cable PCC641 Impact Driver ONLY in easy-to-open bulk packaging to pass the savings on to you. Batteries, chargers, and accessories sold separately.
ARES 70000 | 3" Impact Grade Socket Adapter/Extension Set | Turns Power Drill Into High Speed Nut Driver | 1/4", 3/8", and 1/2" Drive
$7.99
$9.27
Amazon.com
Last update was on: December 23, 2024 7:42 am
- SPECIFICATIONS: This ARES Impact Grade Socket Adapter/Extension Set comes with three 1/4 inch hex shank, 3-inch-long socket adapters so you can turn any power drill into a power nut driver with the extra reach you need. The sizes included are 1/4 inch, 3/8 inch, and 1/2 inch.
- DESIGN CONSIDERATIONS: Each adapter is made of heat-treated chrome vanadium steel and coated in Manganese Phosphate for industrial or mechanical use and meets or exceeds ANSI/ASME standards. The spring loaded detent ball ensures sockets are secured to the adapters.
Milwaukee 2462-20 M12 1/4" Hex Impact Driver with Belt Clip – Tool Only
DEWALT DW2180 IMPACT READY Drilling/Fastening Set, 35-Piece
IRWIN HANSON 1/4" – 20 NC Tap and 13/64" Drill Bit Set, 80230
$7.24
$8.47
Amazon.com
Last update was on: December 23, 2024 7:42 am
- N/A
- Imported
- Ideal for creating and threading fasteners holes in metal
- Creates 20 threads per inch
- Drill bit constructed of high speed steel for fast and precise drilling
- Tap crafted of high carbon steel for general purpose drilling
Milwaukee M18 2850-20 18-Volt 1/4-Inch Brushless Impact Driver – Bare Tool
$75.75
$97.72
Amazon.com
Last update was on: December 23, 2024 7:42 am
- Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces
- Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life
- Includes: 2850-20 M18 1/4 in. Hex impact driver bare tool
- Compatible with all M18 batteries
- Bare Tool Battery and charger not included
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
Amazon.com
Last update was on: December 23, 2024 7:42 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
