100workfromhome 
Best results for 13 craftsman drill press
uxcell Repairing 13 inches Drill Press Quill Metal Coil Spring Assembly 4.2cm
Stud Finder Sensor Wall Scanner – 4 in 1 Multi Function Electronic Stud Sensor Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Detection (Stud Finder)
$26.99
$30.77
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- ➤The Most Accurate & Improved Safety - Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires!For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
- ➤4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
uxcell 1/32 inches-1/2 inches Keyless Drill Chuck with MT2 Morse Taper Arbor Mount
POWERTEC 71104 1/32”- 1/2” (JT33) Drill Chuck with Chuck Key | High Precision 33 Jacobs Tapered Mount Drill Chucks
$19.99
$27.99
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- CAPACITY: 1/32” - 1/2” (1mm - 13mm)
- INCLUDES: (1) Keyed Drill Press Chuck (JT6) supplied with (1) Chuck Key for secure lock
- COMPATIBLE: Works with most wood and metal lathes, drill presses, portable drills – fits the JT33 arbor (shank) or spindle
- FUNCTION: Easily removes chuck assembly with wedge, drift key, or knock-out bar, and provides a smooth jaw operation while securely holding drill bits up to ½ inch in diameter
Jacobs 33364 JK 130 J33 Industrial Grade Keyless Chuck 1.0 to 13.0 Millimeter Capacity with No.33 Jacobs Taper Mount
$98.99
$134.63
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- Drill chucks for industrial use (medium duty), available with threaded mounts for professional portable drilling machines and with taper fittings for stationary drilling machines
- Automatic fitting for efficient, fast Change of tools
- Self-tightening mechanism automatically increases the grip in proportion to the increase in torque during drilling
- Fits tools of up to 20mm in diameter
- Machine fitting via DIN0238 of Jacobs tapers and UNF thread fittings
DEWALT DW2301 1/4-Inch and 3/8-Inch Chuck Key with 15/64-Inch Pilot
Atoplee 4pcs Drill Chuck Wrench for Electric Drill Clamping Tool [Chuck Diameter:20mm/10mm/13mm/16mm]
$10.99
$13.63
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- Drill chuck wrench for electric drill clamping tool.
- Used for controlling tightness of looseness of electric drill clamping tool.
- Chuck Diameter:001:20mm, 002:10mm, 003:13mm, 004:16mm
- Outer Diameter of Gear:001:25mm/002:13mm/003:18.5mm/004:21.5mm
- Can be used in hammer or drilling mode,very durable, comfortable to grip.
Lisle 12060 Large Magnetic Chuck Key
Jacobs 3653 K3C Thumb Handle Chuck Key with 5/16-Inch Pilot-Size for Jacobs Series 34-33C ,633C Keyed Chucks
$12.82
$15.26
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- Nickel thumb grip styles increase leverage and user comfort
- Soft steel handles Limit the potential for dangerous fracturing under excessive load
- Self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening
- Never apply extensions, Pliers, wrenches or 'cheaters' Of any kind to chuck key handles
- Do not subject chuck key handles to hammer or other impact blows
Stud Finder Wall Scanner – 3 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection
$25.99
$31.71
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- FOUR TASK-DEPENDENT SCANNING MODES – Switch to desired mode as necessary. STUD SCAN is used for finding and locating the center and edges of wood or metal studs up to ¾ in (19mm) deep
- DEEP SCAN is used for scanning deeper walls with a thickness up to 1½ in (38mm)
- METAL SCAN for locating and detecting metal (such as ½ inch rebar) up to approximately. 2¼ in (60mm) deep
- and AC SCAN for locating live AC wires up to 2 in (51mm) deep.
RIKON 13-900 14-Inch Band Saw Fence
Replacement Keys for 1/4" and 3/8" Drills (2 Sizes)
MATCC 5 Pcs 6 Inch Polishing Buffer Wool and Wheel Polishing Pad Woolen Polishing Waxing Pads Kits with M14 Drill Adapter
$15.98
$20.45
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- ▶ Thicker & High-Density Design: MATCC polishing buffing pads are increase the thickness to make it last loner. High-density woolen polishing pad will provide greater ability to clean up dust and polish the car. Contact seller if no Drill Adapter or more issues.
- ▶ Material: Made of good quality wool sponge pad, not easy to leave wool on the surface of the car.
- ▶ Adhesive support design from back of the disk - Use it more easily, you can change the woolen buffer pad just in seconds.
Festool 495019 Hose HSK D21.5 5m
Sunex 3646, 3/8 Inch Drive Low Profile Impact Hex Driver Set, 16-Piece, SAE/Metric, 1/4 Inch – 3/4 Inch, 6mm – 19mm, Cr-Mo Steel, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards
$32.92
$38.52
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
- CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
- SOLID ONE PIECE CONSTRUCTION: Eliminates weak points and increases durability.
- LOW PROFILE DESIGN: Access tight spaces.
- DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent identification.
CARTER MAGFENCE II Universal Magnetic Fence
$124.66
$163.30
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- Attaches magnetically for universal fit on most ferrous metal tables
- 16" long, 3-1/2" tall L-shaped aluminum extrusion with multiple T-slots
- Two powerful, switchable magnets for quick, precise adjustments
- Easily removed to use with multiple equipment
- Compatible with all MAGFENCE II accessories
Grizzly G2535 Single-Phase Motor with 3450 RPM
$250.95
$296.12
Amazon.com
Last update was on: November 2, 2024 4:33 pm
- All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market.
- Size: 1-1/2 hip
- Type: Enclosed
- Made to demanding specifications these motors feature the same quality as the motors we install in our heavy-duty machines.
