100workfromhome 
Best results for 11 mm drill bit
Fisch Brad Point Drill Bits (11mm x 142mm) – Premium Drill Bits for Soft, Hard, Veneered and Laminated Wood, MDF and Acrylic Glass – Beveled Edge for Fast, Easy Cutting – FSF-004110 – Made in Austria
$2.69
$3.82
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
- Beveled edge leads to a perfect drilling of the diameter without any deviation
- For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass
- Made in Austria
Taytools 508010 6 Piece Pen Turner’s Drill Bit Set with 7 mm, 10 mm, 11 mm, 27/64 Inches, 3/8 Inches and letter"O" (0.31”)
$25.99
$35.09
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- 6 piece drill bit set specially designed for pen turners
- Precision ground to produce clean entry holes and limit blowout
- Excellent chip extraction via deeply ground flutes
- Comes with bits designed to accommodate the most popular kits
- Contains: 7mm, 10mm, 11mm, 27/64", 3/8" and letter "O" (0.31”)
DEWALT DW1720 Brad Point Bit Set, 6-Piece
MOHOO Countersink Drill Bits, 7pcs Woodworking Countersink Drill Bits Set, Woodworking Chamfer High-Speed Steel Countersink Drill Bits for Woodworking 3 4 5 6 7 8 10mm With Hex Key
$9.99
$13.59
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- ①TRI-POINTED DESIGN: The countersink drill bits set with tri-cuspid centering that make sure drills will not produce offset, not easy to slip, no bias, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly.
- ②HIGH CARBON STEEL MATERIAL: Countersink drill bits are made of high carbon steel which offer high hardness, superior cutting power, good abrasion resistance.
TLEEP 20 Pieces Power Nut Driver Drill Screwdriver Bit Quick Change Screw-Black Chrome Vanadium Steel Metric Socket Wrench Screw 1/4” Driver Hex Set
$13.44
$15.99
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- √ 20 PIECES, 10 DIFFERENT SIZES’ IMPACT DRIVER BIT SET to meet your different needs. 10PCS Power Nut Driver Bits (Standard): 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32 inch
- 10PCS Power Nut Driver Bits (Metric): 12mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6mm, 5.5mm, 5mm, 4mm. Thumbs up!
- √ VERY WELL MADE AND TOUGH AS NAILS - Extraordinary Technology & Professional & Durability. Made from the forged and hard chrome vanadium steel, the hardness can reach 52±2 HRC
Qibaok Step Drill Bit Set with Automatic Center Punch, 3 PCS HSS Titanium Hex Shank Step Cone Drill Bits for Plastic, Wood, Aluminum, Metal Sheet, Metric 4-12/4-20/4-32mm
$16.99
$22.94
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- ????【Material】 HSS 4241 & classic high speed steel with titanium coating for strength and longevity.
- ????【Package】 3-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ) + 1 Automatic Center Punch.
- ????【Easy Drilling】 Two-fluted design provides faster, smoother cutting, provided with small pressure and the sets. Stepped grooves prevent slippage in the chuck.
- ????【Wide Usages】 Perfect Step Drill Bits for home DIY and general building supervision / engineering use. Ideal used to drill holes in various material like iron plate, aluminum plate, wood, PVC sheet, insulation boards, etc.
Migiwata 11mm Metric Twist Drill Bit Set of 3pcs – Jobber Length Fully Ground Straight Shank – 5% Cobalt M35 Grade HSS-CO, Extremely Heat Resistant – Suitable for Stainless Steel Cast Iron
$18.69
$24.86
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking.
- FOR STAINLESS STEEL - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for heat treated steel / hardened steel / high carbon steel. Please try to adjust the RPM when it fails to penetrate. Suggested RPM is 300.
Step Drill Bit Set by Volterin, Cone Titanium Coated High Speed Steel | 3-Piece Set with Pouch | 3-12mm/4-12mm/ 4-20mm, Total 24 Sizes | Multi-Functional Industrial DIY Metalworking
$13.00
$18.72
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- TITANIUM | HIGH SPEED STEEL: Classic High Speed Steel With Titanium Coating For Proven Capability and Durability
- TRI-FLATTED SHANK: Fits Into Power Tools Chuck Securely and Eliminates Slip
- SPLIT POINT TIP: Increases Cutting Speed With Self-Centering And Prevents Walking
- Drilling Holes In: Plastic, Aluminum, Copper, Stainless Steel and Many Other Types Of Sheet Metal (the board must be smaller in thickness than the height of step drill bits)
TooTaci 6-19mm Hex Shank Magnetic Nut Setter Driver Drill Bit Set 1/4 inch Quick Change Metric Nut Driver Set – 14pcs
$17.99
$23.75
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- Sizes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,17mm,18mm,19mm,14 different size to meet your various needs
- Material: Made of heat-treated chrome Vanadium(CR-V) steel, extra high hardness, good abrasion resistance, anti rust and break, durable and long service life.
- Strong magnetism for convenient operation.
- Very easy to be installed and dismantled, not easy to fall off when it's using.
Concord Blades CBD02500HP 2-1/2 Inch Laser Welded Dry/Wet Diamond Core Drill Bit
$58.35
$68.85
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- 10 mm segment height, 3.8mm Segment Width, 5/8"-11mm Arbor
- Use Dry/Wet
- This core bit is used for general purpose dry drilling on a variety of soft brick and concrete block using either a Handheld Core Drill or a Core Drill Rig
- Does not come with a pilot bit
- Item is a pearlescent color. It changes between white and silver depending on the lighting
uxcell Metal Marble Drilling High Speed Steel 11mm Dia.Spiral Drill Bit Black
uxcell 2pcs 11mm Twist Drill w Titanium Coated High Speed Steel Bit HSS M35 CO for Steel,Copper,Aluminum Alloy
$14.77
$21.56
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- PRODUCT NAME - Twist Drill Bit.
- MATERIAL - M35 HSS with CO,Titanium Coated.
- PARAMETER - Shank / Cutting Edge Diameter : 11mm
- Cutting Edge Length : 94mm
- Total Length : 140mm.
- APPLICATION - Perfect for stainless steel, copper, aluminum alloy,as well suit for wood,plastic.
uxcell 5PCS 11mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain
$7.99
$9.99
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- SIZE - 11mm(0.43-inch) Drilling Diameter, 6mm(0.24-inch) Shank Diameter.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.
- SPECIAL DESIGN - Slotted edges make it more sharp, work more efficient. Side open can remove the waste to keep the drill bit clean.
uxcell Brad Point Drill Bits for Wood 11mm x 68mm Right Turning Carbide for Woodworking Carpentry Drilling Tool
PANOVO 9pcs Power Hand Driver Drill Tools Set 5-13mm Metric Socket Wrench Set Power Nuts Driver Socket 1/4" Hex Shank Drill Bit Set
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- 1/4" Shank fits most powered corded or cordless drills,Strong inner Hexagon sleeve (without magnetic)
- Shank length: approx. 2.5cm, Shank diameter: 1/4 inch (6.35mm)
- Specifications：5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm
- It's widely used in household DIY, auto parts, woodworking, professional machine repairing, etc.
- Package Included: 1 x 9pcs Power Nut Driver Drill Bit Set Metric Socket Wrench Screw 1/4" Hex
uxcell 11mm Twist Drill w Titanium Coated High Speed Steel Bit HSS M35 CO for Steel,Copper,Aluminum Alloy
$9.97
$11.76
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- PRODUCT NAME - Twist Drill Bit.
- MATERIAL - M35 HSS with CO,Titanium Coated.
- PARAMETER - Shank / Cutting Edge Diameter : 11mm
- Cutting Edge Length : 94mm
- Total Length : 140mm.
- APPLICATION - Perfect for stainless steel, copper, aluminum alloy,as well suit for wood,plastic.
uxcell Titanium Step Drill Bit 3mm to 13mm 11 Step Size 2 Straight Flutes Hex Shank for Metal Wood Plastic High Speed Steel
$7.24
$10.28
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- [HSS Construction]: High speed steel makes it last longer.
- [Hex Shank]: Hexagonal shank design prevents slip in drill chuck.
- [Titanium Coating]: Coated by titanium, this step drill bit performs well in heat, corrosion and rust resistance.
- [2 Straight Flutes]: Double cutting edges and X-type openings design ensure a faster and smoother cutting.
- [What You Get]: Includes 1 standard size drill bit: 3-13mm. Perfect for drilling holes in iron, metal, aluminum, copper, wood, plastic, PVC board and many other types of sheets.
Meich Forstner Drill Bits 15-35mm 5 Pcs Set, Carbide Forstner Bits High Speed Steel Flat Wing Drilling Hole Hinge Cemented Carbide Drilling Sets with Round Shank Counterbore DC02B
$12.99
$15.07
Amazon.com
Last update was on: December 23, 2024 6:55 pm
- High-speed steel woodworking hole saw open hole neat, smooth, no tremor can sharp cutting edge improves opening speed, easy chip removal also for longer life.
- High speed steel shank, sturdy - Suit for drill press, pistol drill, bench drill, vertical drilling machine, hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine etc.
- Forstner Drill Bit Package include 5PCS, 15mm/20mm/25mm/30mm/35mm, can meet your different needs.
