100workfromhome 
Best results for 10in craftsman table saw
Bosch TS1004 Table Saw Dust Collector Bag
$11.30
$13.11
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Compatible with Bosch 4000 10-inch tablesaws
- Easy to attach and detach to your tablesaw
- Effective at keeping your work area clear of debris
- Provides up to 70-percent of guaranteed dust collection
- Crafted out of heavy cloth material with sturdy zipper for trouble free emptying
Arbor Bearings Sears Craftsman 10" Belt Drive Table Saw Set of 2, 3509
Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert (Colors may vary)
IRWIN Tools Classic Series Carbide Table / Miter Circular Saw Blades, 10-Inch, 24T (15070)
$17.99
$25.73
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Precision-ground teeth allow for smooth, accurate cuts.
- Fully hardened plate runs truer longer. Heavy-gauge high-carbon steel for extended life.
- Features a 5/8-Inch Universal Arbor.
- 24 tooth count blades are ideally suited for trim and finish jobs.
Sears 9-10" Flat End Zero Clearance Table Saw Insert by Peachtree Woodworking PW951
FREUD D1060X ATB Fine Finish Saw Blade
Craftsman 089110109712 Table Saw On/Off Switch Genuine Original Equipment Manufacturer (OEM) Part
Superior Electric SW7B Aftermarket On-Off Toggle Switch 2 Prong For Table Saws and Drill Press Replaces Delta 489105-00 Switch
Freud 10" x 50T Thin Kerf Combination Blade (LU83R010)
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- 10" Blade Diameter, 50 Teeth, COMB Grind, 5/8" Arbor, .091" Kerf, 10° Hook Angle
- Premium TiCo HI-Density Carbide Combination Blend for Maximum Performance
- Thin Kerf requires less power and allows for faster feed rate
- Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$116.09
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 1/2" Tilt or Elevation Shaft
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.34
$43.99
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick
- For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 5,500
- Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood.
- Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required.
FREUD D1090X Circular Saw Blade
WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10"
$275.73
$336.39
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
- Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
- Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
- Operates at two speeds of either 1520 or 2620 FPM.Dimensions of the stand: 13 3/4 L x 15 3/4 W x 25 1/4H (Inches)
- Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)
Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 3/8" Tilt or Elevation Shaft
$39.99
$51.99
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- 4 1/2" diameter handwheel, fits 3/8" shaft. Used on the blade elevation and tilt shafts.
- Fits Older Model Craftsman 113.xxxxxx model series belt drive table saws with 3/8" diameter tilt and lift shafts.
- This handwheel can be used to replace original handwheels part numbers 37835, 6579, and146.
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
$33.00
$48.18
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
- Fine Crosscutting
- Ideal for: Harwood, Softwood, and Plywood
Ryobi 089110109712 Replacement Switch Assembly
$15.29
$20.49
Amazon.com
Last update was on: November 16, 2024 6:52 pm
- Replaces: 16102010G, 889110109712 452080007 984407003 and 984406001.
- Fits: RTS10 10" Table Saw, RTS10G 10 IN. Table Saw, RTS20 10"Portable Table Saw, RTS21 10" Table Saw, BRTS30 10" Portable Table Saw
- This switch has four prongs.
